Search results for query: *

We have the latest and greatest CM 6.3 softwrae on Dual 8700, ESS totally redundant etc. We were shooting trunk issues on Windstream PRI's connected to a Genband/Genview – C3/8000 switch. We have discovered that when we do a campon buyout trunk tg/mbr that the CO does not see the channel as...

We have successfully implemented VPN phones but have an issue adio between 2 of them. The phones work great except when one VPN phone calls another....no audio...call is presented, rings etc but there is not talk path when it is answered. Configuration is CM 4.0, Cisco ASA 5505, 96xx phones...

We are 60% complete with Nortel to CIsco implementation at a large hospital. As you may know, hospitals are analog intensive. We are now faced with what to do with our 1500+ analog devices. The thought of 50 VG224's or 25 VG248's and the associated electrical, physical space, and HVAC...

same issue here, did you find a solution?

CM 3.1.2.639 is the minimum required for this phone to register with he new software.

I'm not sure what yyu are referring to, however, since I posted I found a .xml file on the local machine that writes log files to the Avaya_support directory. In it you can specify a linit to the number of files. I changed it from 100 to 10 so only 10 files get written. I'm not sure what they...

How do I get the MM Exchange client to stop posting log files in the Avaya_support directory of the client PC? This is filling up hard drives.

Had a 3 node DCS connected system. Converted one node to S8700/G650 configuration and rebuilt the DCS connections.Node 1 G3r, Node 2 G3R, Node 3 S8720. Having FAX issues when faxing from G3R to the 8720. Node 1 or 2 to node 3 fails fax. This worked last week before we cut node 3 to 8720. Now we...

OK I tried that as DS1FD and DS1SA. One problem, these are all IP phones. So, I tried abrdg my analog station on the Ip phone, no good, never rings. I tried call forwarding the analog station to the Ip station, no good never rings. I don't think we are recognizing the ringing coming from the...

That will work too, but my real problem is resources.We are installin an 8300/700/IA770 with 5 g 700 and 10 Ds 1 cards. We will be running Avaya Ip wireless phones on this to replace the customers existing 240 Ascom phones. Any config mentioned means one trunk group per phone, the 8300 is...

27.27.0 works fine in 3.1 and 4.0. I find that the iproute does not alwys take and I have to enter it manually. Go to MGP CONFIGURE prompt and "set ip rout mgp 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx" where xxx is the default gateway address. Yes the multiple 0.0.0.0 works, as a matter of fact it's all...

Thanks, I'll try it. Right now I'm B8ZS ESF with a FX trunk group. That works incoming but I had to build a tie trunk to call back to the Siemens. This works but is a waste of resources. Your solution, if it works, will at least save the return trunks. I'll let you know.

I am trying to tie an 8300/g700 with MM710 to an old siemens switch. They are treating it as an OPX and I have to terminate the call at an assigned IP extension. There is a one to one relationship between each DS1 channel and each extensionto an extension. WHat type trunk group? I can get a call...

Ok the instructions are very good but I am missing something. What is the default username and password for the RAS connection. It is mentioned that it is not the same as the switch, what is it?

MG firmware must be at least 25.33

Power down th entire PN or just the last carrier in it?

Check your codec sets and ip-network-region?

I'm not sure about 8.3 but in later releases there is an option on some trunk groups, I believe page 2, to suppress the #.

Thanks these are set as specified

I can find plenty of documentation on installing a new G650 PN. Can't find any on adding a G650 to an existing PN. My question is, since I have to move the existing TDM bus terminator, do I have to power off the entire PN first or can I move the terminator "hot" and connect my new TDM bus cable?