Search results for query: *

There is no VLAN. Registration is enabled and I added another I2004 with no issue. The BCM50 has the latest patch, ver 013.201208-1 BCM50 R6 Aug 2012 Smart Update. I will try a x-over cable for Solar Winds, instead of the switch.

I have a working I2033 on a BCM3.7. When I change the S1 IP to the new BCM50 rel 6, I get to the prompt "Connecting to Server", but it never connects. The BCM50 is local to the I2033 and I have plenty of IP client seats. It is already supporting 10 I2004 phones. I have checked the IP settings...

I have a working I2033 on a BCM3.7. When I change the S1 IP to the new BCM50 rel 6, I get to the prompt "Connecting to Server", but it never connects. The BCM50 is local to the I2033 and I have plenty of IP client seats. It is already supporting 10 I2004 phones. I see a new firmware version...

The phones all have IP seats. The system also has NAT for remote phones. The problem is that any IP set at a location where there is ALSO a vpn on a workstation, has no audio. The IP sets that are not at a location where there is a vpn client work fine.

I have a BCM50 with Rel 6 and a Remote User License. I have the BCM50 programmed and I can get the remote sets to work great, as long as they are not at sites where a VPN connection is present. The VPN sites have their cable IP addresses listed in the SonicWall and I suspect that the headers are...

Thanks Curly, I thought this may have also been an issue on some MICS's. I have the Answer Supervision set to SUPER. I also have the lines set to NO on Auto Hold. I have another 20 yr tech who is stumped on this one, with me. The CO is from the LEC. Any other help would be sincerely appreciated.

I have a BCM50 rel 6. I have “auto hold” set to NO. When on a call (analog lines), either incoming or outbound, and I want to answer the second call ringing, my first call still goes “ON HOLD” and it will not release. This is frustrating if the call is someone’s voice mail or my voice mail. The...

Thanks Hawks, I have another MICS, same customer, different location the passes the Cell number ID. Same carrier. The Carrier says the two sites are identical, but obviously they are not the same.

I have a MICS 7.1 with a PRI. At night, the client forwards to cell phones, their DID numbers. The client wants to preserve the inbound caller ID and pass it as the Outbound Line ID, to the “forwarded cell phone number”. Example: originating number is 415-853-1212 calling DID 408-853-9001. DID...

I have recently installed a BCM450 rel 6. I am getting the alarm Service Manager - Voice over IP Gateway (feps) has stopped unexpectedly. Service Manager is attempting to restart the service. The software was updated to Software Update Name: BCM450.R600.SU.System-006.201106 There are 24 IP...

I have a new BCM450 release 6. I can't get LAN 1 to work. Everytime I make any change in programming requiring a "reboot", the system ends up in SAFE OS. I have to use PuTTY to "Transition in the main OS". I have the license applied and I have the SU from June 2011 installed. I have replaced the...

I am trying to configure SIP carrier vitelity on a BCM50 release 6. I have the IP trunk keycodes. Vitelity uses name/password authentication. DTMF mode is rfc2833. I have the register string. I also have the SIP Proxy, Inbound server, outbound serverand domain name. Does anyone have a template...

To Clarify, you only have ONE choice in the mailbox setup for both message notification and transfer. That is the problem. I have it set to Pool 7 to support the LINK (flash) capability on the transfer. There is no Pool 7 to select a line to send a message notification.

I have recently installed a BCM450. They use the the old school Centrex "External Call Transfer" in their Voice Mail to transfer callers on analog CO Lines. I set the Outbound to be POOL 7 (a non-existant Pool). I set the string to be #P1xxx-xxx-xxxxP. This works perfectly by Flashing and...

I have just installed a BCM 400 3.7. The Windows workstations are now getting a screen message upon bootup. Message goes away if the BCM is unplugged at the LAN port. The workstation message says "Windows System Error Duplicate Name Exists on Network". DHCP is off. Is it possible that the BCM...

If you know the file name of the "This Call is Being recorded --Beep", I need to replace it with silence. I know that the BCM50 3.0 has the option to remove it in the mailbox setup, but the customer does not want to incur an upgrade charge. Thank You

I have a BCM50 6.0 with two T-7406e Base stations. Each base has two handsets. The customer states that the base units cause interruption in the speach when there are multiple handsets in use. I have heard the calls and they do have clipping and missing words, even when they are within 5 ft. of...

Do you know of a good consultant?

I need help configuring the following (2)CISCO CISCO-3640 CISCO 3640 4SLOT SA MOD RTR (2) CISCO COMPATIBLE 3640 128MB DRAM (4) CISCO 3600 SERIES 1PT ETH 2PT WAN NTWK M (6) CISCO WIC-1DSU-T1 CISCO 16/17/26/3600 1PT T1 DSU/CSU This equipment will be located at two offices that now have three new...

In the past, the IP2050 client was available on the BCM. Where can I download a copy of this version?