Search results for query: *

'Working assssssssss dessssssssssssigned' said Avaya.

Never seen that, either replace the handset or replace the tech. Your choice. :)

Thanks for the follow up on resolution on this.

There is a way but it won't really be recommended here as the official way of doing it. But you set it up on local network at the corp office and register the extn first, then you static in the SIP server info from the admin menu on the phone (public facing IP of corp firewall), then on the...

Thanks derfloh, however they not using the VPN client on the 9608, this is a site to site VPN tunnel using dual wan internet on both ends.

Good feedback, and goes along with my thoughts also. I'm going to get clarification on the dual wan sonic wall VPN tunnel setup on each side Main Office<--->Remote office. Are there any experts that have any advice or tips with firewall setup for dual wan internet failover setup for remote...

Single IP500v2 R9.1 and 9608 phones. The remote office has dual-wan internet setup as failover (not load balanced) with a VPN tunnel back to main office using sonic walls. When the primary internet fails and the 2nd internet standby connection kicks in, the 9608 stays at discover and will...

Yes, I agree with Kwing, simple and it'll work. I love my DS phone customers and they love me, but I would never try a DS expansion beyond the included cable.

Probably the port or card then, move the extn assigned on port 2-1 to a spare port on a different card and plug it in there and see if all your problems go away.

Which R11 are you on? what build?

Wonder what the story behind this is; 1-17775992838 SIP96X1-98157 J1xx Russian garbage in Downloadable Dir

legacy card carrier and IP400 analog 4 trunk card FTW.

looks like no one read your post correctly. The SD card has nothing to do with the internal memory usage on the IP500v2. SP7 should be coming out soon, with that said, if you have a real memory leak and it's causing your system to lock up or reboot you'll need to start a ticket with Avaya...

well I verified my ars 6-digit table #1 is working correctly on the magix. It appears when the call is sent to the T1, it only sends 7 digits when it matches on that ARS table #1. When I change the pool to 890 (from 70) for the ARS table #1 and route that same call to loop start lines, it...

I've done it with the user programmed mostly on the primary and users on the local IP500v2 where it made sense, then I have everything failover to the secondary which was just a glorified standby by server. You have to decide what makes sense with your design, the network, the trunking. In my...

Am I missing something here? what does a SD card have to do with memory leak issue? Are you talking about the drive size filling up on the SD Card? Are you using voicemail pro or the SD card for voicemail?

Thanks for the update TTT, I've made the following change to table 1 to be a 6-digit and from the flow chart it looks like entry 1 should be the area code and entry 2 be the exchange/prefix, in this example the customer wants to dial 9-605-217-xxxx and have it route as 605-217-xxxx to the...

Thanks for the response, we need only certain 605-xxx-xxxx numbers that are dialed as 10 digits and are local, (the carrier is forcing 10 digits to this area code with certain prefixes for local calls), however they need to maintain their 7 digits local calling and add in 605-xxx-xxxx 10 digit...

Merlin magic r1.5+ with PRI Calls dial fine with LD 1+10 and 7 digit local. Need to have 605-xxx-xxxx outbound calls sent as 10 digits calling out. Right now dialing 9-605-123-4567 only sends 7 digits so the pri carrier is seeing 605-1234 instead of 605-123-4567 Poked in tables under ARS but...

VPN your 9608's or set them up properly as remote extn's with security