Search results for query: *

Hi obt, I have setup IPGW before using DN2IP entry over VPN and with the same PBX & card. Now have NS500 on our end and the other end is different make&model PBX. Can this be achievable using IPGW? If yes, i assume configuration will be similar? at least on the NS500 end. On NS500, I believe...

i can see 'SIP over TCP/IP' in feature manual. Can't find any more info on this. Mind to share?

Hi again, I now understand SIP trunk. Are there any features to connect end to end PBX with SIP-GW? What do i need in terms of hardware/AK? The objective is to have both pbx connected and able to call using ext. number. Or is it IP-GW that im referring to? [ponder]

Hello guys, Updates; Card Property Line Coding: AMI (A) Frame Sequence: PCM30 (B) Frame Option: C=0, D=1 (C*) Port Property Trunk Property: Public CO Dial Mode: DTMF (C*) E1 Receiver Type: Undefined (C*) with current settings now, E1 cards shows 'Normal' and 'Syncronised', yet still getting...

Hello, Need a bit of advice on common and basic settings for E1 CO line, hunting, DID, I have connected our new E1 from ISP mux to our E1 card and I can see E1 card status is normal & synchronised. Going to the E1 port settings, all 30port shows 'Fault' I tried to set an extension with one of...

Hello, So my company has upgraded our 40x analog lines (dying copper) to PRI E1 (after long thought on SIP). We have installed 1x PRI30 on our NS300+1NS320. ISP guy delivered and installed their AMS 16 port multiplexer, connect with a spare core of fiber optic (spare from our leased line / same...

Hello.. i'm new with SIP services, we have plan to subscribe for SIP trunk. Can we use any digital phones (KX-DT521) to use SIP trunk for inbound/outbound call? Or we will need SIP phones + SIP Ext license? [ponder] *add* Out of curiosity, how about SIP phones use legacy analog CO? Will...

Hello! Anyone have any manuals related to subject? Downloaded from panasonic(net), it is password protected, or someone to share password perhaps? -Feature Manual -Installation Manual -PC Programming Manual -PT Programming Manual -Operating Manual Appreciate it! Regards..

No worries, I got it sorted out, i missed another step to load the file to the card! Now everything tested, DLC16 Firmware, DHLC8 Firmware, MPR Programme Card Firmware, DT5xx Series Telephone Firmware, all are working perfectly now after those upgrades. Thank you and appreciate for the...

Thanks for the files. Here what i have done :- 1. Transfer bin file PC to PBX 2. Set DLC16 Card to OUS 3. File View and Load 4. Load the file into the card *** From here how do i load the file into the card? on step (4) i put the card back to INS - Version remains the same, Version 7.004

Your Welcome.. Sorry, i don't really get you.. Where should i get the .bin file you mention, how should i use/upgrade the dhlc_v0801.bin? I have done initialize reset > connect using your latest maintenance console (UPCMCv7.8.1.1) > card firmware remains the same as below. Please advice...

Here you go, the firmware that our dealer provide to us.. https://www.dropbox.com/s/jd8et1iihcph8wo/FIRMWARE_TDA100%2C200%2C%20100D%2C%20TDE100%2C200.zip?dl=0 KX-TDA100/200 Version 5.01 KX-TDA100DXE Version 5.2 KX-TDE100/200 Version 8.0

UPDATES! 1. Got our TDA100 upgraded to Version 5.01 (Required for DT5xx Phone) 2. Connect to existing card (DLC16) - Problem still persist, telephone display still shows 00000, buttons not working, no ring tone 3. Connect to existing card (DHLC8) - It is working fine!! DLC16 (KX-TDA0172)...

Right! I just got the firmware 5.01 for TDA100, 5.2 for TDA100D from dealer which will support the DT5xx series phone, which is also mentioned in the DT5xx manual. Will confirm this today after firmware upgrade. Thanks for the input guys!

Yepp..Got it from your link :) UPCMCv7.8.1.1

Yea.. The DT5xx Series PT works on below ; TDA100 Version 5.01 above TDA100D Version 5.2 above Tested on both PBX anyway.. I got our TDA100 on 5.01 above (Which meets the requirement) Yet the DT5xx Series PT not really working properly.. it still showing 0000 in the display, buttons are not...

TheCoreWithin I manage to get the DHLC8 work with GREEN LED and are able to configure after the INITIAL RESET Soon after i restore my old DSYS (PC-SD/PBX) > Reset by command > Skip Save > Replace DSYS > Restart The DHLC8 card back to not working and shows status "FAULT-DIF" I would still like to...

Yep,, currently our TDA100D is on V5.1 Ok, here is the steps you provided in the other link.. I have write a comment in CAPS 1> in programm click the safe config - CAN'T FIND THIS OPTION ANYWHERE 2> SET SVM / to OUS - WE GOT NO SVM, SO IGNORE.. ------ 3> Transfer File to PC ( DBSYS ) -...

Thanks for the input.. Now i will need PUMC Version 8? Tried looking for it, luck got me to 7.2x only.. Any site available? Did you just mention DHLC8 card? Yes, I have just installed a DHLC8 card, it show RED led and status FAULT-UNACC FAULT-UNACC appeared as status when installed in...

Hi, As per subject, It seems like i am unable to find any details on upgrading PDMPR Versions from 5.1 to 5.2.. I will need to upgrade the version due to compatibility for KX-DT521 PT.. Currently PT does work, yet with some problems, eg. Display shows "00000000" and all buttons, flexible...