Search results for query: *

ok on server b what happens when you type statuslicense? What output is given ? Are you in a position to connect a laptop to the services port ? If so can you confirm the following: Under security tab on the Web Browser, is port 80 and 443 enabled? If not change them so they are.

what does statusserver show you from the active server.

Comcode 700330640

if you have the company name and address avaya will be able to search for the sold to.

what firmware is on the board ?

Below are the relevant instructions from the manual Follow these steps to install the license file: 1. Locate the email containing the AE Services license file. Detach the license file from the email, and store it locally on a PC. The PC that the license file is stored on does not have to be...

means that the port has been marked. Sometimes tier 3 have to remove curruption on the system.

sorry for some reason i thought you were running 3.1 from linux type swversion or from sat type newterm

its a known issue with your software load Best bet would be to upgrade to CM 3.1.4 via PCN 1523 its a free upgrade.

Its just a watchdog warning and like previous poster has stated its normally caused by the firmware on your samp card

from the linux command line do the following grep ServerType /etc/ecs.conf if it says ICC then its an s8300B if its an s8300c it will says s8300c when you run the command. You can also tell by looking at the cpu by the following command more /proc/cpuinfo if the cpu is 400 then its s8300b...

go home and have some christmas lunch and try latter

whats the PCN number

Yes

I doubt avaya would support the CMS if it crashes with freeware on it.

what CM version I meant sorry

what software version are you running ? as there is an MR for this.

sounds like you need to check your settings file. check the following setting SET PROCSTAT

you need to be in at sroot level am sure you can guess the default sroot password!

There is its an undocumented command from the shell