thread965-1768765
Hello Family.
I too have the same problem: I can only initiate a conference call from Polycom SoundStation 2 configured with an analog line of the HiPath 4000 V4. The "VARCONF" setting is well activated and the WABE is set up for the "CONF" function. Despite this, "31" does...
Hello dear,
Jai need to down grade our phones OpenStage 15 HFA v3 in a version that can walk with HiPath 4000 v4.
Thank you for helping us to have the best DERT, or the best files ". img " or ". app " that can help us to succeed in the down grade. Thank you also for describing the exact...
Thank you sbscu;
among other since Friday past the hard drive of my H4K is seen by the system as faulty.
When I activate it with the command:
CHANGE-DSSM: UNIT = A1, NOC = 1;
ACTIVATE-DSSM: UNIT = A1, NOC = 1, UNIXBOOT = YES;
It takes for barely 15 mn and after becomes defective:
still. What...
thread965-1728703
Please
I would like to have the file "TIEL. MAC "because the link does not work, and secondly I would like you to show me how to create the file " TIEL. MAC ".
Thank you
Thank Donb01, I understand.
However my system is in Togo (universal GMT), so we have no change in date or time or winters. So the thought that the fact that I was not declared a start/end date was correct for not having a change of time, but this is not the case.
That's right my v4 version is...
Thank you donb01 for your help.
Below is the result command DIS-SONUS which proves that there is no entry find in the table SWITCHOVER:
DISPLAY-SONUS;
DISPLAY-SONUS;
H500: AMO SONUS STARTED
ADJUSTED FUNCTION MODE OF SONUS - TASK : AUTOMATIC
H04 : EU-STANDARD APPLIES FOR THE AUTOMATIC...
thread965-1745606
Hi all
I have a problem with the configuration of the timetable of my HiPath 4000 v4: Despite that I chose the zone hoiraire Africa/Lome, my time changed on 1 April past while Lome is at GMT 00 and should not change time.
I do not have a NTP server but I told myself locally...
Merci Lopath,
Cependant, il y a des SIP qui ne sont pas compatible avec H4K V4 à cause de la version du SIP: exemple POLYCOM SOUNDSTATION IP 5000.
C'est pour cela je voudrais avoir la confirmation.
KINDS REGARDS
Thanks sbcsu,
But I have a duplex system HiPath 4000 V4, is there any accurate for duplexes that you should give me? or is it the same procedure?
I also recall that the system is already in production and disk hard official already since 2008 where he was commissioning and is that on 6 November...
Hello,
after removing the dependency, and activation of SD, here the State for analysis and assistance in order to administer my H4K from the's @192.0.2.5
Help me:
<DIS-DDSM;
DIS-DDSM;
H500: AMO DDSM STARTED
CONTROLLER: 1
TYPE: HD SS-NO : <STDH4> SIZE : 3346 MB (...
OK!
Can you help me to create new hard disk?
Where to download the latest version of the software compatible with H4K V4?
will I be able to format the hard disk see with the command: START-FORM:A1,":A1H11:"; ??
help me to download the corresponding software!
Thank you
OK!
Can you help me to create new hard disk?
Where to download the latest version of the software compatible with H4K V4?
will I be able to format the hard disk see with the command: START-FORM:A1,":A1H11:"; ??
help me to download the corresponding software!
Thank you
Hello,
I also have the same problem with HiPath 4000 V4;
Here is my T-DIMSU; :
< TEST-DIMSU:;
TEST-DIMSU:;
H500: AMO DIMSU STARTED
H01: CC: 97% OF THE TOTAL SHARED MEMORY AREAS AND 94% OF THE
TOTAL DYNAMIC MEMORY AREAS RESERVED FOR THE FLEXAMA ARE USED.
H01: LTG: 74% OF THE TOTAL SHARED...
Hello
I had a concern for reboot caused by disconnection in the several IP yesterday on my H4K post network, and I no longer have the hand by the WBM to administer from the's http://192.0.2.5; H4k even ping 192.0.2.5 spends more, Start-HISTA regere defective DD error (F09: AREA/DEVICE <:A1H1E:>...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.