Search results for query: *

I was transferring my CICS from one office to another and when I plugged it up, the CICS won't boot and the green led is just blinking. Is this possible of a bad capacitor in the unit? Any ideas?

^thank you. I'll try that. :)

I'm new to this phone system stuff. Just upgrading my MICS from 4.1 to 6.1, but my phone just blinks. When I put my original 4.1 back on it works fine. Any ideas why changing it to 6.1 doesn't work and ideas on how to make it work. I called a local phone system reseller and he said to drain the...

Its a two prong and checked the DC output which was approximately 9V. Thanks for your response.

The software is a 2.0. Ill try laptop later today and give you guys an update. Thank you!

I tried the troubleshooting but it didnt help much. I checked the power supply that it gave an out of approximately 9V DC. and the sequence when I reboot the CP is. LED 1 & 2 solid green (about 10secs), then LED 1 & 2 OFF (about 40 secs), then LED 1 & 2 flashes alternately (for about 10 secs)...

Thank you in advance for your help. Well one of my callpilot light (#1 port) started flashing and now its not booting up. Is it a hardware problem? If so what part can I replace to fix it?

Ah FINALLY! got my voicemail back with 2.0 software. I drained the capacitor in my 6x16DS DR5 software to reboot and default everything back up. Got my f903 to work then f983 worked too. :)

i thought my pw was config, how can i change my password for the xftest?

I have a 6x16DS with DR5 software.

Im trying to get into **xftest so I can delete the inactive features so I can reboot my flash, but after dialing **xftest it asks for a password. im trying to put my default password config, but nothing happens when Im dialing it. It just shows "Password:" and "retry" on the lcd screen. Theres...

So I should put in the 1.7 in the flash and dial f903 first, then f983. Then reinsert the 2.0 software and press f983? Ive tried this, the flash still wont read the 2.0.. I tried dialing speaker 25 (my flash extension) and it asks for a log.... I would think it would be 12000, 102000, or...

Ok I have two norstar flash and 3 softwares(2.0, 2.0, and 1.7) on hand. I initially had one flash with 2.0 and the other flash with 1.7. I was curious if my extra software was in working condition so I swapped it with the flash that had the 1.7 in it, but it didnt work, nothing came up after...

Thank you very much. I have been searching for the PCata card that would work so I can input the bin file in the card. Before I purchase a card, I wanted to make sure that it will be compatible. Will this card work...

just add (at)yahoo.com at the end of my username. :)

No, the drive is not listed. Thats what I was hoping for.. a new listed drive where I can access it whenever I put in a PCMCIA card. The readme is long b/c it talks about compatibility with every operating system. Mostly talks about FAQ on issues regarding about the adapter, but my issue is not...

Ok so i wasnt really sure if i was suppose to download the mce 30 day trial or download a file from the downloads section. so I downloaded this for my laptop; (http://www.elandigitalsystems.com/support/downloads.php) the pseries pcmcia driver. After I installed it, it made a Pseries folder in...

I have tried searching all over the net for that elan card reader program, but I havent notice it. Do you have any direct link where I can download it?

thanks, ill try that elan card reader program on a laptop that has a pcmcia slot. Thanks. Ill let you know how it goes.

I have 2 PCMCIA cards that are both version 1.44 for my startalk flash. I think one of them is corrupt b/c it doesnt work when I install it. So I bought myself a PCMCIA reader thinking I could copy the files of the good 1.44 software and paste it onto the bad 1.44 software. But im having trouble...