Search results for query: *

Looks like it is a permission level, does anyone have an update as to what this is and how to clear it? and why it occurs after the upgrade

Ok, so you have 250 changes you need to make, but ASA doesnt have a blank option in some of the selections i.e. MWI server, coverage paths, well i just found out that if you put "" in the field, it will blank it out.

Sav trans, then test ala l c

is it a DID or POTS line?

is the TG set for dial access? it may also be that you do not have the ARS defined

Avaya drops wireless headsets Avaya voice gear will be available through certified vendor partners By Tim Greene, Network World December 21, 2009 03:44 PM ET Avaya, which promotes itself as a software company, is trimming back even more on its line of hardware with the elimination of...

Good question, see if this helps http://www.sundance-communications.com/cgi-bin/ultimatebb.cgi?ubb=print_topic;f=1;t=001322

i can't find anything having to do with DTMF

i think this is because the digits on the phone do not translate to the Avaya system, i have the same issue

It's status logins, has been for a few years, list logins only would show you the logins, status shows you who is currently logged in.

you could also put the IP address of the NTP server from the "configure server" link in the maint web interface

is the music source on the tenats themselves correct?

Yes.

it's best if you call the vendor & request the CSR for the circuits you have. you can look at the dial plan for anything that has EXT, but that could also mislead you.

on the hunt group assign the analog port: Queue Limit: 20 Calls Warning Threshold: Port: Time Warning Threshold: 0 Port: 08C0901

What is station 223? Do list ext 223

Thanks!!

it looks like in my CM's the limit per display capacity is 90K, can this be increased?

i have mine at svcl. when you dial 911, what happens? do you have a trace?

Makes sense, they knew about this since they developed Aura