Search results for query: *

Thanks for your response. That is exactly the procedure I'm using. As posted, I am getting dead air after I dial 1211. Then it times out. And this only happens on a SIP phone. Procedure works fine on an analog phone. And an auto-dial button programmed with 1211 on the SIP phone works as well...

Yes Admin SIP user with console permissions is trying to activate restriction on another phone in a client room COS. Hotel environment

On the trace after dialing 121+1 the call just sits there and then times out. I should receive dial-tone after 121+1. As a quick fix I added a autodial button with 1211 on it and it works. Still don't understand why you can't dial it manually from a SIP phone. This fix will work for now. Thanks...

System CM 7.0: When trying to dial the "User Control Restrict Activation" code to restrict or unrestrict a station they get dead air when dialed from a SIP phone. Feature works fine from an analog set. SIP phone is able to dial other feature codes OK. Any thoughts would be appreciated. Mike

Thanks for replying. I've added the check mark. I use DUN frequently with a good ole Win 7 machine. I was hoping someone had run into this on Win 10 and had a solution

Have not been able to get DUN to work on Win 10. The connection will dial out, get answered but not produce an after dial window, then errors out as "can't connect". When I open the security tab on the connection the error 608 pops up stating "A device was specified that does not exist. The...

Forgot to add that on page 2 of Sys Maint to also enter the board location of your CLan in the bus-bridge field. MikeC

Not sure what type DS1 circuit pack you have but if it's a TN767 I think it needs to be an "E" or better. I don't have access to a V6 but on a V8 you should also have a CLan board installed and on page 2 of the "Sys Maint field put a yes in the pkint 2 field. This enables the packet bus to...

Looked there. No help

Would someone know of a document that explains the definition and use of the different ARS call types. I certainly understand hnpa, fnpa,intl, and svc. What i'm having trouble with is pubu, npvt, natl, and locl and when to use them. Thanks for any help

Thanks for all your input. The problem is fixed. After another talk with the CO they found a DTMF setting that was wrong. They had it set for wide-band. Changed it to RTD and it worked. Thanks again Mike

Here it is. Thx for your time TRUNK GROUP Group Number: 51 Group Type: isdn CDR Reports: y Group Name: Packing Local PRI COR: 51 TN: 1 TAC: 451 Direction: two-way Outgoing Display? n Dial Access? n Busy Threshold: 70...

Definity G3SiV8 and Intuity Audix 5.0 using PRI from Charter Comm. When Audix hunt group is called from a cell or land-line,the digits are not being recognized by Audix. Caller gets dead air. Using system monitor you see no input. When switch remote-access is called by cell or land-line, digits...

Has anyone wired the alarm jack from a 120 csu back to a G3R aux cable external alarm leads? Thanks

Thanks to all, Customer's network security scan had seized all the ports. He wasn't able to release from his end. Took your advice and did a reset 1 from CM and it released the ports.

Thanks but "reset login" is not an option. This is an S8500 w/V13 CM

I have a customer who tries to log into ASA but is denied. When I status logins I get the following. All ports are nailed up. The customer is trying to locate the IP addresses. Is there any way to force-release these. Re-setting the clan board does not work. Thanks USER LOGIN INFORMATION...