Search results for query: *

Can someone please tell me what the default passwotd is for a mailbox on the NEC IPK II Voice Mail. I created one thru the MGR source but can't program it until I have a password.

I have a customer that has an NEC DS 1000/2000 (the best I can tell from descriptions & pictures from the customer) & they are having issues with a couple of features. The customer was referred to me & is about 2 hours away from me. They do not have a repair company near them as they are in a...

The Music On Hold (MOH) input is on the main board which will connect to the 25 pair cable on the 66 block depending on which connector it is plugged into (usually the yellow/orange pair). The cable from the MOH Unit (if it is an RCA to RCA cable) will need to have one end cut off and connected...

Well I got my answer, the problem was in the provider translations not being correct (Spectrum). They told me in the beginning that their settings were correct when I originally called in to question why it was not working. But after calling in to question them again, I talked to another tech...

Yes, You can use this programming access from any digital display telephone on the system.

You can use only slots 3,4,5,6 for the station card expansion (esi-8). Use memory blocks 7-1 (card assignment), 7-2 (terminal assignment), 4-10 (extension number assignment), 4-12 (line key assignment) in that order will get you there more effeciently. There are other programming assignments to...

Yes, We are using car keys to each company for incoming calls to be able to establish which company is receiving the calls visually & I have programmed the phones with cap keys (all telephones have the same cap keys to make it appear as a squared system. In other words, all telephones have the...

Belvedere, Thanks for your reply but, I am confused. This is an IPK (not IPK II). I am not aware of v2000. Here is what I show on my current CPU'S in stock when Feature 3 is recognized. CPU #1 shows sp 1014 r4.62 key sys r2up 48p (with no upgrade chip) CPU #2 shows sp 1034 r4.61 key sys...

I have a customer that has a PRI on an NEC IPK system that has (4) different companies under roof involved in this system and I have programmed Car keys to show the incoming calls with Cap keys on Buttons 1-8 but the caller ID does not show up when Incoming calls come in. I must mention that we...

Belvedere, Thanks for the reply but should it be mb 7-1 & 7-3 ? The 7-2 is for assignment of dss consoles,slt adaptor, voice mail, & message boards.

What is necessary for the NEC IPK SAT programming to work? I have a (mifm-u20) card & need the steps on what to do to make it work. I also have the NEC SAT program on my Laptop but need help.

belevedere, Thanks for the reply. I will let you know real quick as I am going to test this tonight with the provider (Level 3 Communications). We have to test in the after hours (after 530 pm) because the current telephone system (NEC Elite 192) is not capable of doing this so I have set up a...

belevedere, Thanks for the reply. I am trying to change the outgoing caller ID on a PRI circuit within the NEC Elite IPK telephone system. I believe that in memory blocks 4-47 & 4-62 it is possible, right? I have not ever had this request before now. Also in memory block 4-47 look at Note #5 in...

Need help on overriding current caller ID on NEC IPK telephone system equipped with PRI.