Search results for query: *

Yep! Guess it's just time to sit back and take a wait and see attitude!

I think I could do something in CCM but not knowing which DID # they will call presents a problem!

Has anyone heard of this yet. Getting e-mails passed from another hospital thay they may have been part of a "Telephony Denial of Services Attack"!

Thanx for the reply. I will check.

Is CCM6 compatible with IE9? New supervisor received IE9 but can not use CCM6. I can use CCM6 with IE8.

I did discover that conference does work on one site off the CCM. Must be in the programming!

Yes, Cisco phone B hits conf. button, calls phone C, then hits conf. button to connect all 3 phones and phone B drops from the conference.

All calls come into Opt81C and then route to CCM over T-1. Phone A in Opt81C calls a Cisco phone B. Cisco phone B conferences phone C in Opt81C and trys to connect. Phone B (cisco) drops out and is not part of the conference that they initaited. Is there a fix?

Still trying to find someone in our IT department that can set: the "disablepstgrow" setting must be set to false They can't seem to find the place to change it within Outlook 2007 in my desktop PC.

We also lost Desktop Messaging when we went to Outlook 2007! This is a bulletin I gave to it but it still has not been fixed. Callpilot Desktop with Outlook 2007 Issue CallPilot Inbox is not populated with Outlook 2007 Document Id: KB94123820 Last Modified Date: 01-04-2011 Support...

Posted this on the Nortel forum and figured I would try here as well. Can I get the called party to see the DID number of the Cisco phone connected to the Nortel 81C with a PRI connected to the outside world via PRI? We want to display the DID # of each Cisco phone or a pre-determined number...

I just check and I do not see, "set both Calling and Called Party Transformations Sections to Calling Party Number Type Cisco CallManager and CallingParty Numbering Plan to ISDN." Our CCM software is: System version: 6.1.5.10000-10

This is what we have: ADAN DCH 34 CTYP MSDL GRP 1 DNUM 4 PORT 0 DES Cisco USR PRI DCHL 34 OTBF 32 PARM RS422 DTE DRAT 64KC CLOK EXT IFC ISGF PINX_CUST 0 ISDN_MCNT 300 CLID OPT0 CO_TYPE STD SIDE NET CNEG 1 RLS ID ** RCAP COLP NDI CCBI CCNI...

Can I get the called party to see the DID number of the Cisco phone connected to the Nortel 81C with a PRI connected to the outside world via PRI? We want to display the DID # of each Cisco phone or a pre-determined number set for the Cisco Phone profile in CCM.

Thanx, I'll give it a try!

We have CCM 6.1 and want to use Station to Station Paging/Intercom. Can this be down and how? Also, can a 7911 be used for this?

We have a person calling in from the same number all the time causing hate & discontent. Police have been notified! I can fumble my way through our SCCS. Can someone post a simple script that will take the cell phone CLID and through SCCS give music and then disconnect for this one number? Thanx

I solved the problem, at least for the 7906! I mounted the top notch of the phone to the top pin of the wall bracket. I removed the plate mounting screw from the bottom hole and installed a longer bigger head screw in the mounting hole leaving it out about a quater of an inch. I mounted the...

Is there a special wall bracket for a 7906 phone to mount it on the wall. The phone does not mount properly on a standard SS wall bracket. The pins on the bracket do not line up with the slots on the phone. I found some huge Cisco bracket that has 4 plastic anchors that you put in the wall...

Yes, I have Desktop Messaging on my PC. I open the message and listen to it. Then I go to file and save it as a .WAV file. That's how I did it.