Search results for query: *

Strange, I got it working with moving the combocard to slot three! Any suggestions what to do next? How can I default IPO500v2? Do I need to use serial cable as in the old days or is the reset button on the back working ok?

It doesnt work. I´ll change the slot now and will see if this make any changes :-( Where to set the codec? Under extension it is set to automatic? Can I apply anywhere else changes?

Ok, thanks I will give it try. I already set back the IPO to default but this wasn´t working at all. Will keep you updated. Thank you very much for your support!

And the cards! Is VCM missing? ********** Warning: TEXT Logging to File STOPPED on 1/11/2012 16:40:47 ********** 2152992mS PRN: Monitor Started IP=192.168.143.3 IP 500 V2 6.1(22) 00E007069F0C (IP Office: Supports Unicode, System Locale is deu) 2152992mS PRN: LAW=A PRI=0...

Thanks amriddle! Here we go, I think the cards are missing. One moment will try again! This was analogue to IP! ******* Warning: Logging to Screen Started ********** 2044903mS CMCallEvt: 0.1016.0 -1 BaseEP: NEW CMEndpoint f54de020 TOTAL NOW=1 CALL_LIST=0 2044903mS CMCallEvt...

Hi, I haven´t touched IPO for two years now but decided to move form my SMOE to IPO550v2. I have a combo card and a phone2. I can´t make calls from my POT extensions to 1616 or 9630 phone. I´m able to place calls between those two but not sure why I´m directly going to voicemail once i´m trying...

Hello, Scenario: Internal call to boss should be diverted to a Huntgroup. VIP Numbers should be able to call the boss. How can i do this?

did you enable multicast routing <enable ipmcforwarding> for those vlans? then try it again! ciao

Hi, you to create two different udp profiles and the apply the udp-profile to the vlan <conf vlan xxx udp-prof xxx> see command ref or concept guide ciao

www.algol-europe.com ask for Thomas ;-)

yes, i default the system with x2, x3, and x. Pot ports don´t work!

Hello, i´ve got a small office Edition. It is running hot, and the monitor and the serial port prompt 312105mS PRN: DU_SLICOFI2: chip version: V15.15 every second. Tested it with several SW versions. Any ideas? Thanks

Hello, we ordered the Avaya IP Office TTS CD Set 700293921. But CD two from five is missing. Can anyone provide me a download source, please? Thanks an regards Sorpio

i mentioned that it is better to uninstallfirst than doing an upgrade if you come from 4.1 to 4.2

thanks intrigant, i already viewed yor post about ping xxxxx with -v .... a question: in the gp do i have to change settings under computerconfiguration or userconfiguration?

Hello, does the Layer 3 Qos work with PhoneManager PC Softphone 4.2.12 and WinXp Service Pack 2? How can i configure it under windows? Or does the softphone application not set the dscp value in the ip packet? In the wire shark trace only the ipo is responding with dscp taged packets, not the pc...

http://www.algol-europe.com/Content/Images/SalesAndSupportTools/Chn_AvExtrConfig_1360-02_2007_Aug.pdf

Where can i see how many Pro or Softphone User are in use right now, and how many licenses are available?

Example The following command displays summary inline power information for ports 1 to 3 on slot 3 on a modular switch: show inline-power info ports 3:1-3 Following is sample output from this command: Port State Class Volts Curr Power Fault (mA) (Watts) 3:1 delivering class3 48.3 192 9.300...

Hello, I´m installing the 3645 Phones and upgraded them with the new SW on the Avaya Support page. Now in the menu the point enable IPO is missing. has anyone the old sw? The page http://www.spectralink.com/softwareUpdates is not reachable anymore. Please send the SW to sorpio at web.de Thanks