Search results for query: *

Since the Old ISP connection is still active I switched back to it and everything seems to work just fine now. Is there some check box that I am missing on my firewall?

We just changed over to a new ISP this past Friday and now sites that were not blocked before are now being blocked by our Sonicwall NSA 240. The only change that was made to the Sonicwall was the static IP address assigned to the WAN interface. And yes, I can access these sites if I bypass the...

I have a Sonicwall NSA 240 and I need a little help. Currently anyone who tries to open a RDP session from the outside is allowed. I want to limit that to only certain IP addresses. How would I go about doing this?

I am trying to use a VBscript to map printers for a group of computers. As of right now I am trying to run the script via GPO at start up but it is not working. I have even tried copying the script to the start up folder but it still does not run. I can manually run the script and it maps the...

We recently upgraded our internet bandwidth and our ISP needs me to change the IP address that we use on our ASA 5510. All I should have to do is change the IP settings on the interface using the ASDM and then change the Gateway IP in the Static Routes. Does this sound correct or am I missing...

I currently have two AD domains, Domain A and Domain B. There is a full trust setup between the two domains with Domain B holding the Schema master and Domain Naming master rolls. Domain B has very few users and I would like to get rid of it and migrate it to domain A. I have already moved the...

Results of "show interface fa0/14 switchport" on 3550. Name: Fa0/14 Switchport: Enabled Administrative Mode: trunk Operational Mode: down Administrative Trunking Encapsulation: dot1q Negotiation of Trunking: On Access Mode VLAN: 1 (default) Trunking Native Mode VLAN: 1 (default) Voice VLAN...

Results interface fa0/24 switchport Name: Fa0/24 Switchport: Enabled Administrative mode: trunk Operational Mode: trunk Administrative Trunking Encapsulation: dot1q Operational Trunking Encapsulation: dot1q Negotiation of Trunking: Disabled Access Mode VLAN: 0 ((Inactive)) Trunking Native Mode...

sh vtp status" is the same. results fo "sh interface trunk" on 3550 Port Mode Encapsulation Status Native vlan Fa0/14 on 802.1q trunking 1 Gi0/1 desirable 802.1q trunking 1 Port Vlans allowed on trunk Fa0/14...

I have changed both ports to "switchport mode trunk".

And the "sh interface trunk" command is not valid on the 3500. Here is the port config for the 3500 interface FastEthernet0/24 switchport trunk encapsulation dot1q And for the 3550 it connects to interface FastEthernet0/14 switchport trunk encapsulation dot1q switchport mode dynamic...

This is the result of the "sh interface trunk" command on the switch the 3500 connects to. However, the port the 3500 physically connects to does not show up. Port Mode Encapsulation Status Native vlan Gi0/1 desirable 802.1q trunking 1 Port...

This is the VTP status of the 3500 VTP Version : 2 Configuration Revision : 0 Maximum VLANs supported locally : 254 Number of existing VLANs : 5 VTP Operating Mode : Client VTP Domain Name : USD320 VTP Pruning Mode...

Here is the VTP status of of one of our current swithces. VTP Version : 2 Configuration Revision : 34 Maximum VLANs supported locally : 1005 Number of existing VLANs : 25 VTP Operating Mode : Client VTP Domain Name : ******* VTP...

From what I can tell all is set the same and there is no VTP password.

What seems to be giving me the biggest trouble is getting the switch to see my other vlans. We use a catalyst 6505 as our vlan router/VTP server. I am able to set the 3500 to a VTP client in the correct domain but when I issue the sh vlan command I am unable to see any of our existing vlans. I...

I have a 3550 that died and the only thing I have to replace it with is a 3500xl . I am having a hard time getting the 3500 configured the same as the 3550 so I need all the help I can get. Here is the config for the 3550. Retrieved through sh run. I'll post what I have for the 3500 shortly...

I am going to start studying for my CCNA and was wondering if any of you have used or recommend getting a kit from ciscokits.com. Also what study guides would you recommend?

I figured out how to add another global address list and filter it by OU. However, instead of just adding the contacts of that OU to the address list it adds all of the contacts we have in AD. Also, it does not recognize any groups that are within the OU.

We have hundreds of external e-mail addresses that we send to on a regular basis. I would like to add all of these addresses as contacts in Active Directory and then add them to a Global Address List. This way we could avoid each of our users having to maintain a large contact list on each of...