Search results for query: *

Okay I have another hardrrive that i am going to install and watch the system boot up. This is to verify whether the controller is fried as well. If it comes up and the lan ports are turned on then I'll have to rebuild the database again because there wasnt a backup made that I can locate.

Thank you Pandabear, I just did a "I could of had a V8" smack upside my head. I do remember setting another phone for this a while back. LOL

I'll have to locate a backup, i've been taking over a recently departed mitel tech's responsibilities. Hopefully he had them. I'm going to try something i've done before as a temp measure to get a backup. One system I upgraded the software and it corrected the disk errors, i backed it up and...

Okay after several minutes this came up. Looks like a hard drive error. Established communication with L2 subsystem 0x38f1500 (tMIPSlog): disk cache error: device e56b4c8 block 80865 errno c0003, disk read failed Adaptation Layer Coordinator SUCCESSFULLY started. 0x38f1500 (tMIPSlog): disk...

I was just called out to a site with a 3300 CXI controller. None of their phones are working and the controller has a flashing alarm light and a solid HDD light with no Power LED on. Logged into the maint port and power cycled the switch. MITEL SYSTEM ROM R2.3/7 Jun 8 2007 (83) CCA Number...

I have a 3300 MXE (r8.0.8.8) that have several T-1s running both local and long distance for a customer. The client wants to add one user who will only use a LS line for outbound and inbound calls. While everyone else can go in/out the T-1s. Also they do not want the console to be able to...

I'm sorry, it is a 200-icp 4.0.3.12.

We have a classroom setup where the receptionist calls into a classroom and the phone auto answers. Since the teacher may not be close to the room she'll need to be able to respond. Some are complaining the the mic is muted when this occurs and they have to press the button to be heard. What COS...

On occasions when our customers dial the voicemail hunt group directly from a speed dial and delete a message the mwi stays on. Then I have to tell them to use the message button to delete the 'call back' message sent to the phone to turn off the flashing light.

I would do both. run the 100 pair and the fiber at one time. When you switch to IP you will just need to have a POE switch on the 5th floor to power those IP phones, the fiber will connect that switch to the switch on the main floor with the ICP switch. Then you can use the 100 pair for analog...

SUCCESS! (Sounding like Dexter from Dexter's laboratory). Found the differences, located the Installer Hex, Duplicated the entries from the others into that hex. Uploaded. And able to log in now.

Thanks, Downloading backup database now. Then I'll change Maint2 password and download it again and save as a the same name but a different location.

Sorry it's an ML. And I have a hex editor now.

I was just given an old sx200 LW17 H24.0.0 date 19-JAN-1999. Of course the installer password has been changed. I was able to get in with Maint1/1000 but I need to make sure I can have full access to this system. I read in a previously closed thread that I can change the hex field for the...

Have an emergency situation where a client wants some smdr numbers to present in a meeting. What I would like to do is capture the smdr in hyper terminal as I do with a 3300 user port 1752. Is this possible with a 200 ICP? And can you explain how to set it up please? Meanwhile I am still...

The teleworker server is either on a DMZ or connected by a public ip address correct?

yes with mobile extension you can call the TUI number internally and externally and program it. Takes 2 minutes.

I have a good understanding of how it works but just to make sure.. In the 200icp the voicemail port will send your phone a call back message when someone leaves a voicemail. Pressing the message button on the phone will either dial the voicemail hunt group or give you a visual option to...

How can I monitor what digits are being sent to my 3300 remotely? The only access to it is the https port. I just need to know what digits to strip or add and the managers of the avaya system it is connecting to are slow to respond.

One more thing, in the digit strings form there was a 1 +10 digit to follow entry. I think that was causing a decision making process for certain calls that were follow a 1888 +7, 1866 +7, and 1800 +7. I believe the tech before was trying to make sure all 1800 went to the local trunks.