Search results for query: *

It worked. Thanks so much! I knew there was not much too change, but my forgetful mind just could not bring it back.

On our CS1000 we need to forward calls to cell phones. I was testing it one time and actually had it working. I have since forgotten what parameters I changed to get it to work. Is someone able to tell me what parameters need to be changed to forward calls from a CS1000 to external numbers?

Thank you! I appreciate the help.

We have a Nortel CS100 on our campus. We had issues with a clock card and it would print XMI000 alarms and one shelf would go out. We replaced a clock card and it seems to be running smoothly. The question I have is what LD do I use to see if the system has printed any XMI000 problems at any...

Thank you so much! I could not find a description on line and did not have a book that had that information in it.

We have a CS1000 swotch with a fiber remote containing one shelf. We are having problems with the fiber connecting to the NT1P63Ca card. We are not familiar with the fiber connectors which connect to this card. Does anyone know what type fiber connectors they are?

Thank you so much! It had been a few years since I worked on Call Pilots and never had worked on a 201i. You have helped so much!

I have accessed the Application Builder. We are trying to schedule days during the Christmas on the holiday schedule for AA purposes. I do not see them in the Day control block. In reading the specs, it leads me to believe those schedules would be found in the Call Pilot Manager not the...

Thank you! I have found the Application Builder and find I do not know the password. Appreciate the help.

We have a Call Pilot 201i on a CS1000. The Auto Attendant needs to have some schedule changes for days Campbellsville University is not in session on a non holiday. Where in the Call Pilot do I access these schedules to make needed changes?

Thanks! I have a place for pc port where 0 is off and 1 is on, I presume this to be the same area you are referring to.

I have a BCM50 with i2004 phones attached. Some of the i2004 phones do not allow a pc to work on the pc outlet on the i2004. What configuration changes have to occur to allow the pc to work through the phone. Any help...

We have a Call Pilot 150 on a BCM50. We changed the auto attendant recording. The problem is that the old recording still plays at the end of the new. How do we erase the old?

Thank you so much,I had never encountered that before.

We had the same issue ablut a month ago. Windstream tier 3 tech support dialed into the modem and I had to uninstall and reinstall the flash card to reset the password.

I have a CS 1000 and I have a number and it says it is a MCDN. Is anyone able to tell me what a MCDN is and what overlay you are able to prt the information in? Thanks

Release 6.0

Is there a default admin 2 password?

How do you reset the administrative password on a CS1000?

Do you use a DN to access the voice recordings?