Search results for query: *

Hi Has anyone had the issue of SIP trunks not releasing following a call. I have a TDE200 setup with only SIP trunks. When the customer comes in of a morning the trunks are locked up and he has to reset the Pana. SIP provider are useless and saying it's not their issue. I have to setup my own...

Hi there A hotel I have been asked to look at had a power outage and managed to lose its programming It's a Aria 300 HOTEL They used to be able to show the room as clean by keying in *17# this isn't happening now. Numbering plan is set to 3 and SLT program mode is set up as *1 I can't see where...

Hi all Company I am dealing with wishes to upgrade its nurse call system currently using pagers. Will an AASTRA ASB 150 integrate with a nurse call system easily? The system currently has 7 DH-3 BAAA/2C DECT handsets. Can these receive messages and display same? TIA

Hi I have been asked to fault find on a Aria 300 Hotel system. The SLIB2E card in slot 14 (Cab 2) is playing up. I have swapped cards and I am finding that the voltage from each pair is lower than that of the other cards in the system e.g. the dodgy slot is outputting 9V per pair whereas all...

Every speed code I dial now dials the same number. eg #5001 dials 29873640 #5002 dials 29873640 This appears to be a default speed bin number but I can't find where it is!I am going mad

Ok Managed to store the number but now dialling #5055 does not dial out? When I press the sys key max bins is 299

I'll give it a go today

So CMD>720> then 055 for the BIN?

Hi there I've been asked to reprogram a System Speed Dial number on this old system. I have managed to get into CAT mode on the main handset but when I key in Command> 72 DE I get Digit Error message. The number is in bin 055. Customers us #5055 to call an outside number. I am pulling my hair...

hi sbcsu Managed to get into the PBX via the main phone. Thanks for your help. Manager software worked up until it queried the username and password then crashed. I use an XP laptop. Have you had issues with the software at all?

Thanks a million sbcsu I will give it a crack and see what happens.

Hi there I don't normally work on these systems but have been handed a job to make a few changes. I need to either connect via serial and make programming changes or can use the main handset if needed. Does anyone have a link to the manager software? Is there a default password? Anyone got a...

lol, did all that and lowered the settings in device manager too! I bit the bullet and reset the whole unit. Can now login via web.

Thx mate but thats what i have tried, both with HT and putty. Checked the COM ports in device manager to and all appears ok. Using XP btw

Hi Currently trying to login to a MFIM50A yia serial to reset the password. I have tried multiple combinatons of baud setting etc to no avail. The terminal window just appears inactive. I am obviously doing something wrong here,, could someone point me in the right direction? Cheers Davog

I am trying to access an extensions SVM from external. I have allowed remote access in 5.3.3 I have set up a PIN on the extension. I get all the way to dialling *38 then I get a reorder tone. NE Ideas?

Does your carrier allow this?

Sorry, also using SIP trunks

Hi I have an NCP working with 4 Dect phones on an 8-Channel Cell Station. You need to wire 4 digital ports consecuatively to the Cell station to get it to work. Regards

Hi been asked to change the COS of a handset on one of these systems. They want it to now be able to call out whereas before it was restricted. I believe that I need to find a CAT terminal to make programming changes and I am assuming that I give the station the COS of 1 or 2 depending on how...