Search results for query: *

Hi all Does anyone know if these handsets are supported on the NS700? Thanks in advance!

Hi all, I have a ns700, connected to the customers LAN. On this LAN we have our own router/circuit setup for sip trunks which works well. Customer would like to use the media relay but use their own router to route the traffic for the remote extension. One of our engineers had tried to put...

Hi all, My understanding is if over 32 IP/SIP EXTN on the ns700 we need an expansion lic. Am I right in saying I can have say 16 digital handsets plus my 32 IP/SIP before requiring a licence? Ie the dig/analogue extensions do not get counted within the 32 limit for Capacity ? Thanks again

Hi guys, Simple question, how do I prefix CA with a 9 on external calls? Weird issue, some PCs seem to insert it itself and I can just paste the 11 digits in and works ok but most does not. I have ARS ON. I want to be able to dial from outlook and paste numbers into dial field when...

Pleasure

I would look at your site setup as you want peer to peer or it will hold onto DSP resource

Could be issue with the VPN To stop peer to peer I use a different P2P group Check your handsets have gateway address at each site Make sure set to local How many sites ? Is it remote site to remote site without vpn between remote sites ?

Figured it out cheers OBT

Hi All I have two sites linked (NS700) via IP trunk. Using enhanced qsig licence so each site can see DSS status. My question is can i poulate users in CA on each site so i can see their status on the the other site?

Hi all Looking at implementing a centralised VM solution. My understanding is I need usual DSP/storage/ licences for UM. I will have remote PBXs connected via IP Trunk. For these remote sites do I need an enhanced QSIG lic to enable me to use the centralised vm? Any tips on configuration would...

Hi guys We have had a request from customer who wants incoming caller display disabled. We have spoke to Gamma our provider who tell us they cannot disable at their end ..? I’m looking for way to disable it on the pbx? We have changed the display on the handsets (321) but when listening to...

Cheers. Yes that’s what I would want , so in order to have extensions from each site in my group I would need a mobile licence for each extension? Can’t I just create a portable extension and forward it to site B extn number and put all the PS in the group? But to do that I need the mobile...

Hi All Looking for some guidance on the capabilities of an IP trunk from one PBX to another at a different location. (NS700) Client would be looking to have an auto attendant setup at main site, then certain opt would pass to extensions at the other site using the IP Trunk? would that work and...

Hi all I’m looking to be able to monitor the number a busy extension is connected to. So rather than getting busy when the DSS is lit up red it shows the number they are connected to ? Also is it possible when I am on a call and someone is trying to call me and they get busy it would show the...

Hi OBT How are the greetings recorded for the interview mailbox? Do you have any pointers on how to set this up? Cheers

Cheers OBT

Hi all We have had a request for a campaign setup on the Panasonic UM Voicemail, we would normally offer this on our Avaya products but have never deployed on an NS series before. Does anyone know if it is possible ie caller gets to mailbox and they are prompted with a series of questions one...

Hi all Is there a log anywhere that will show pbx programming login history? Ie date/time/ changes made? Thanks

Cheers for the info. Bit off topic but have you had any issues with NT521 handsets re booting? Site is connected via VPN back to main, we have a NT543 on same site which is fine. VPN seems stable, pbx is on v6. Going back tomorrow to look in to this but any suggestions would be greatly...

Hi all, Looking for some clarification on IP Dect, I have 2 Offices. The two are quite a distance away from each other with a road in the middle of them. On the main site they use 155 cell stations and this works good. Signal is obsolete on the remote site due to the above. I have a VPN...