Search results for query: *

is the Voicemail - SVMi-20e or SVMi-20i? Will help us help you [bigglasses]

4.1.2 to set these up Check number association in 2.8.0 is default as these are. Your first group will probably be 9. Then set your CLi's etc in 2.4.3 Hope this helps

Yep capacitor gone on the PSU. Boots fine but phones will be in a boot loop.

Hi Pal have you replaced or swapped the 2 x 4DLM + 1 x 2BRM I would of said it will be the 2 BRM locking the card up try that one first.

A1D05 is correct. Yes the SVMi-20E is Legacy VM and shows the age of the system. They are only viewable via Serial. If you have a Blue Cisco lead knocking about they are perfect for the terminal connection via RS-232 and Hyper Terminal. Once you get your ports setup correct you'll see it in the...

I do. Can only find 3.2.69

Ok so where can I download that version please?

Hi All, I have a system with 6 phones being added currently on R5. The system is a V4.0 with existing handsets. I cannot find the 5410_R2.bin file anywhere. Tried all the way down to 3.0.580.0 Can anyone help me. Thanks in advance Russell

Hi, Scenario - Power failure due to UPS. Expansion module disconnected and unable to re- connect to system (red light). Recycling of power and System boots up and works, new (used) expansion added which also works fine. Can connect via system status but when trying via Manager I get the...

Thanks for that after a bit of fiddling seems to be working fine. Two HG and removed line appearance. Fingers crossed Thanks for your help

Hi First post, Hunt Group consists of x226,x221,x222 in that order. I have set-up the main number to ring the hunt group 01 Ringing handset x226 first for 4 rings which it does, I then want it to ring x221 next then ring finally x222 that then follows onto voicemail of x222 No matter what...