Search results for query: *

Einstein, Did you tried what khalid suggested >>? what's out come were you able to Increase /tmp finally ?

In that case by pvid's number, that's NOT only source though, Is that your LUN's are through SVC ? than there another manged disk number.

you need to track based on your hdiskx (x is hdisk number on VIO & mapping i.e output of lsmap -all or " lsmap -vadapter vhost0" say for vhost0 you have 5 disks. , from that you know disk's number & LPAR to which it associated.

Hello, Are you using logical volumes in vg to assign to new lpar or assiging disk to vio then assigning that disk to lpar ? If you are using hdisk on VIO then assiging to lpar you can assign what ever diskx you want to assign to client. In client lpar itself it takes it's own...

Hello, I would go into HMC which manages these frames, select each frame then click on properties, select I/O tab then on Description look for "PCI 10/100/1000Mbps Ethernet UTP "* look for owner tab & select which ever Ethernet have Owner as "unassigned" note slot corresponding...

It cannnot be converted to Windows,However you can convert it to pLinux.(Redhat or SUSE linux).If that helps.

Yes possible & it's One of the feature of NIM. 1.Take mksysb of 5.1 on NIM 2.Create SPOT using that mksysb 3. Restore to Client (AIX 5.1) As long as your NIM is equal or Higher OS level that Client it's supported.

Difference P6 Blade & P6-520 It depends on what you are trying to accomplished 1.P6 Blade is Managed by IVM , wheras P6 -520 can be managed by HMC. 2.System Resources such CPU, & Memory in p6 blade are limited, whereas in P6 520 you can have higher capacity of resources. 3.Maximum of 2...

As p5wizard said ,P6 Blade needs supported version of Blade Chasis/BladeCenter , which should have Management Module, Network Switch , as well as Fiber Switch , In case it's using shared Storage. being said that one cannot not have just blade p6 with out all it's other component. each peice...

Hi, As far as I know it should NOT have any impact on Client Lpar'S, when you change hostname name of VIO Server. It's seems like all vscsi mapped is only related by slot number's .... etc. I don't see anywhere it's hardcoded with hostname.

Hello, Which version of HMC you are running ? ,Is that you have same HMC for P5 & P6 ? ,If you have different HMC for P5 ,I would check hmc LAN Adapter settings for particular Interface where you have issue.

Hi, Did you verified the hostname is listed on correct ethernet interface i.e eno, en1 ..etc. what ever ethernet interface you are using. #ifconfig -a verify for same ehternet you have hostname entry.

Hi, Can any one Please point where are server logs in VIO ?. As we have in these logs in AIX /var/log/syslog/. Thanks !

Hi, We did VLAN tagging on VIO's in both Power5/6 P-Server 570's & MMA , Using CISCO routers, have not encounter any issue's concering routers.

Khalid, I think once we have mksysb on NIM , We can make it as mksysb resourse & make SPOT out of it & than boot of it as NIM client ..?

Hi, 1. You can do mksysb, on your NFS mounted NIM server,Assuming you have nim server. mksysb -i -X -p -e /"Monuted directory" 2. Yes smitty update_all , Point to directory where you have .bff ( repository)

If you have mksysb on NIM boot it from that in Maintenance mode, or boot from Media of AIX cd01 - It has to be at same or higher level of your last Image booted on these system (JS22 Server). When you Boot in Maintenace boot , go for Option 3. Maintenance & Recover than select 2 .Access rootvg...

Hi, What type of Blade is it ? JS22/21 Or JS12 Can you boot blade to SMS menu & list all bootable devices .? Aslo You can Select boot order from BladeCenter Mangement Module. If you see your SAN disk (hdisk1) in your bootable devices select that as your first bootable device.

Hi Steven, I did the same with cd0 ,It worked. Can you verify rmt0 is available to VIO on which your trying above command.

Hello exsnafu, Well I'm trying to edit a file on AIX Server as root, I'm hitting with the following error "0602-100 No lines exist in the specified buffer" Press return to Continue