Search results for query: *

According to Cisco, the RVS4000 Does not support XAUTH. So if anyone ever ask in the future, we now know. Thanks for your help I have decided to just put a RVS4000 on each site and vpn that route.

Update: Not to confuse things, but if i put the vpn router connection in aggresive mode, i no longer get the previous message no wildcard. The message changes to [VPN Log]: "VPNPHONE"[2] MY IP ADDRESS #1: policy does not allow Extended Authentication (XAUTH) of initiator (we are responder)...

Just seems like the RVS4000 is not going to be able to handle the Avaya VPN phone for some reason. I have tried all your suggestions, and have gone over everything 3 times. But i just keep running into the message [VPN Log]: packet from MY IP ADDRESS:2070: initial Aggressive Mode message from MY...

Thank you Kindly for your suggestion. I have made all the changes you suggested above, and the log on the vpn router reads. Jun 23 09:42:29 - [VPN Log]: packet from MY IP ADDRESS:2070: received Vendor ID payload [RFC 3947] method set to=109 Jun 23 09:42:29 - [VPN Log]: packet from MY IP...

Ok, last try before i just setup a vpn point at each site with hardware. We are running ip office 500 with 4.2, the phone i am useing is a 5410 SW IP phone with vpn software loaded. Vpn router RVS4000 Below are two images of the setup pages on the router itself...

This is mind boggleing For some odd reason they don't want to dial 9, even though thats how the system is designed and it dial's 9 no matter what. So we created a SC to bypass the dial 9. The extensions are 1300-1400 If someone in the office dial's 11xx instead of 13xx by accident then hangs...

See img below. At the top where it says favorite folders, i would like to put a link to my calendar in that box.http://pingpatrol.com/fav

Anyone able to find a solution for this? I have searched the web and came up with nothing yet. Thanks

I set the system up and have all the voice mail box's ticked, i just left the site and it is all working now. Had to reboot the phone system and it started working. Thanks for the reply Telecomtek

Can't seem to locate this problem, we have a ip office 500 running 5.0 with embedded VM. If any of the users are on the phone and we transfer a call to them, it just rings and rings. We would like for the call to go to VM if someone is on thier phone. Where would i look to fix this? Thanks Experts

Is there a way to add a calendar shortcut in the Favorites page? I have inbox, unread mail and sent mail in my favorites now and would like to add a calendar. Thanks for any help.

Thanks boss, handy site there

http://marketingtools.avaya.com

Worked like a charm, Thank you for your expertise..

Is there a way to have our lines ring before the auto attendant picks up? Ip 500 5.0 embedded VM Thanks

I am still novice to the ip office configs, but the embedded vm is not so hard to setup. Basicly if you go into phone manager, then click on system tab on the left. You will see a voicemail tab. That is where you specify to the system which voicemail you are running. Which you stated your...

Will the embedded vm allow you to put functions like dial 1 for ext 201, dial 2 for extension 202. Or will it let you direct extension transfer? When our voicemail picks up, you can press any button and get no response. I know about the break *0 *1 *2 but was hoping to not use that. Thanks for...

On the setting IKE ID Type, What is this setting exactly? Also the setting IKE ID? I assume the IKE ID Type should be set to KEY-ID? and I assume the IDE ID Type should be set to the Tunnel Name?

Ok Thanks for the tip kholladay, I have updated the settings and now reciving error policy does not allow Extended Authentication (XAUTH) of initiator (we are responder). Attribute OAKLEY_AUTHENTICATION_METHOD I am searching what would cause this error. Thanks

I need a little more expertise with this it seems. I setup the vpn at the office on a RVS4000, I can connect to it fine from home with a vpn client or windows vpn, both work fine. But when i try and connect with a 5610 SW IP phone, the phone gives me error IKE Phase 1 no response. On the vpn...