Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: lcns
  • Order by date
  1. lcns

    TLU 80 to Ascom PX

    This is an italian application system using ESPA protocol, can you provide any information based on ESPA?
  2. lcns

    TLU 80 to Ascom PX

    Can anyone supply PASAI and TLU 80 1/4 connector programming and wiring to the Ascom 942PX module?
  3. lcns

    Ericsson MD110 ,Diavox

    Where are you located? Are you using an NIU?
  4. lcns

    VSU - wont play welcome message?

    We are setting up a VSU to play a welcome and queue message on an incoming trunk call via an E1 to a Common Operator. We have set up the CORGS, CALT and RA commands but it will not play. Internal calls to the OC work fine, ASPAC 116 set up for internal and external calls. Any ideas why...
  5. lcns

    3 COM NBX 100 holiday greetings

    Finally figured it out and that was the problem - thanks for the reply!
  6. lcns

    Steps to adding a DID number

    I need to add a new DID number to an NBX 100 with r604 SW and a PRI. What are the steps? I know this is done in the Dial Plan but I am not exactly sure about editing the file and importing it back into the system? Will it cause the system to reboot?
  7. lcns

    3 COM NBX 100 holiday greetings

    We have holiday greetings set up for Memorial Day, 4th of July etc. in our AA - TD Greetings. The problem is when I select a greeting - for example memorial day and I tell it to play on Time of Day and Date Range for a certain exisiting AA it will not play - What am I doing wrong?
  8. lcns

    URGENT HELP request G4 - L4

    I am trying to connect a remote LIM via CAT5 with a GJUG4 ROF1314247/4 and the L board is a GJUL4 ROF1314246/7 R3A. Does anyone know if this will work and if so what are the TX-RX pins on the boards?
  9. lcns

    3COM NBX 100 - Make Change, Loose Remote Site?

    Having a strange issue with a 3COM NBX 100. We have 2 sites, The main site is connected via a point to point T1 to the remote site with 3Com Routers and an uplink card in the remote cabinet. Whenever we make any programing changes no matter how small we loose the remote site cabinet and phones...
  10. lcns

    GJUL4 to GJUG5 connection - CAT5e

    Thanks, Does the G board use the same pin locations as the L board, I cant seem to find the G pins in ALEX?
  11. lcns

    GJUL4 to GJUG5 connection - CAT5e

    Has anyone tried to connect a LIM back to a GSM using CAT5e shielded cable on the 120 ohm ports? In this case the distance is less than 150 feet.
  12. lcns

    BC12 E-1 to Asterisk

    Can anyone suggest the ROCAI, RODAI and RODDI for a TLU76/1 to an Astersik box? The MD will be user side and the E1 will be a tie line. Thanks
  13. lcns

    MD110 Service Codes

    It is a BC9 system
  14. lcns

    MD110 Service Codes

    can anyone verify the procedure for "follow me and group hunt follow me? I thought it was *72*xxxx from an extension where xxxx is the follow me point amd *72* xxxx*yyyy# for a group xxxx is the group you want to forward and yyyy is the ansering group?
  15. lcns

    Trouble with CP150 connecting via IE

    What is the best way to default it?
  16. lcns

    Trouble with CP150 connecting via IE

    Having trouble setting up a new CP150, changed the IP from defualt via serial to 192.168.1.50, laptop to 192.168.1.1 subnet 255.255.255.0 on both Launched IE - http://192.168.1.50 to connect to CP manager to initialize but I cannot connect? IE Says it opening the page and then times out. Any...
  17. lcns

    Callpilot Manager

    Cannot initialize new CP 150. Verified IP address to be default 192.168.110.10, changed laptop to be 192.168.110.11 subnets on both 255.255.255.0. I can ping the CP but cannot connect via Internet Explorer to initialize. Tries to clear browser cache etc. But cannot connect, any ideas?
  18. lcns

    Headset Key Programming On IPS

    Forget last submission - found in previous thread on an I series phone top row button 6 from the left is F. button 1 being the top left button
  19. lcns

    Headset Key Programming On IPS

    One more question - would the "F" key be the same as the HELP key?
  20. lcns

    Headset Key Programming On IPS

    Thanks, I think it makes sense now.

Part and Inventory Search

Back
Top