Search results for query: *

I want to create mailboxes outside of what is created now 1-8 which are menu node and I want to create different ones. My issue is that we were 3 digit extensions before and they began with 1 and now we are 5 digits beginning with 2**** and in the controller anyone pushes 1 it directly dials...

I have a Linksys SPA2102 adapter hooked to an EnGenius base. I really cant get these 2 to talk . I have the EnGenius setup and registered to devices. Extension 20197 is setup as an 5010 IP device and Generic SIP phone with no luck, i reserved device MAC to assign an IP but can't access via web...

yes we connect to a bogen amplifier in most cases and external speakers.

I have setup a few 5485 paging units and notice that ringback will come through speaker then the announcement - can i get around this? MCD 3300 extension 20170 speedcall 0993 number *3720170 I tied with a # and no luck Thanks.

We have several IP paging units ON 3300 controller and wondered how can i stop the ringback <THROUGH SPEAKER> before paging announcement - pretty annoying. we set the paging unit up with extension user and device 5010 IP Set a speed call 0993 with dial string *3721070 I tried the pause # and...

We have a similar setup but we have a lot of simultaneous calls so we went with G729 out of the gate to help reduce bandwidth issues due to inbound call volume. i thought you could tell carrier to deliver G729 and set the SIP peer profile the same. i know if u put call on hold or vmail it would...

do the phones stay in resilient mode <blinking cursor> or does phone loop trying to reach ICP?

Please read below,we are currently engaged with Mitel/3rd party vendor but looking to the tek-tips community for further assistance/ideas. I the customer am currently experiencing issues with resiliency and fail-over in the Mitel controller world. The basics are we were sold on (2) controllers...

Just completed setting SAN up. We have a HP 2312i and now trying to determine why/how to use the iSNS server for the discovery of storage? 2008 Server Domain Controller is what I imagine I will use as server I have the version 3.0 downloaded for install

Has anyone come across this? I believe it's at the Carrier Level .I called Mitel and they have nothing. The SIP peer profile is set at 330 which I imagine is default.

in my discussions on this topic it comes from carrier adnd stays compressed in the mitel but very important that voice carrier has it at G729

nice, i did finally realize this after going through setup, however now I'm stuck on iSNS server setup and each volume on vdisk is on controller A. I left setting on auto for that but did not split it up over A/B controllers.

ok, thanks. re-read and tried again. it did reset phone, pretty quick but worked - thanks

So we purchased a iscsi san and we want to determine 100% that the iscsi port are that or truly ethernet ports? We know it has mgmt ports per controller but we are puzzled? Thanks, John

I tried this and window jsut shows load initiated after I confirmed the command? No phone reboot? laod ipdev xxx <xxx=extension> and zip? I have the 3300ICP 4.1 sp1 SOFTWARE 10.1.1.11_2

I was able to telnet today and see the data flow in putty, looking for a format description. we would like to export the data and format and review call data. any recommendation on call accounting software?

I'm currently trying the same and my hosted e-mail provider will not do smtp relay for our domain? so i have been looking at options? will the free smtp work for me?

so any ideas? we have found that the entry is from carrier and we are working currently to try and eliminate the entries.

ok, so it looks like it goes out over trunk group 1 and 2. i guess i can do a trace on my station and see what comes back? it's funny , i should test 911 and 9911 to see what they both do.

I have definity g3 older software, trying to figure out what my 911 calls go out on? i have read some posts and see some decent info but I'm a flintstone in regard to setup and flow of 911 and don't want to cause myself any issues. we are going to disco some pots lines. JM