Search results for query: *

Ok I take that back I did those codes and it rings however should the automated VMS be coming on? Or is it just not set for the number of rings for that setting?

Ok I did that and what happens is when I call in 78 & 79 causes the line to be in use.

Can I see what port is programmed? I'm a little confused on the port programming like you saying to programming the intercom for 78 & 79 For me when I do F00 + it says Program Extension 11 I don't understand what I should press next to say program the intercom to 78 or 79

Is that this one right here? http://wedophones.com/Manuals/AT&T/Partner%20voice%20messaging%20install%20&%20pgm.pdf For some reason it's still only doing one quick ring then it goes onto saying the party could not answer the call. when i type in the number say like #506 and then 1 then 1...

Ok I have one problem here.. when I call the line it rings once and a voice message says the party is not available What settings do I change so it at least rings 4 times then goes to voice mail?

Wait I just thought about it since I'm only just using the ACS R6 I don't need it.. however I was messing with it and I checked it today and it says backup failed I don't have the card for it.. is it really needed? I think the battery backup holds the settings for 45 days?

I wished I knew that so I could of included it in my order..

I already have my first setback.. the 2 slot carrier I had for the old system does not fit the R6 the slot is much longer then the old one.

thanks this should be helpful in getting started

The ACS R6 shipped as well as the PC mail card should be here on Tuesday

Ok I just need one then.. I have 7 extensions and 4 lines but only 1 line works (someone disconnected or pulled out the black and yellow wires for the terminal block) So the ACS R6 plus the Partner Voice Messaging PC Card is all I would need

Since I came in with the system not in great shape I just know of 3 areas for extensions but it's wired for more then that but I don't know all the jack locations As far as the lines it seems like someone pulled two wires off (yellow & black) I think those colors are for a second line? I have...

So I get the ACS R6 with the PC card so what I'm getting confused at (looking at the first post) both modules installed right now are 206E so I would need the ACS R6 plus another 206E or what?

So wait.. so I need both the ACS R6 and the partner Vm system? I don't think I ever posted a picture but these don't sit on a carrier but screwed onto each other (long screws) onto a wooden wall. I need to order the stuff because they want to have it running before the new year.

The only thing that has me confused is the above ACS R6 and the Partner messaging what's the difference between the two?

Well Looks like I finally got the OK to order the Partner ACS R6

Yes a answering machine

Well I just heard back from them and now they don't want to change anything.. they just want to add a voice mail in one of the aux jacks on the phone.. but if I'm right the Aux jack wont work unless you pick a line? I haven't seen if it works when the phone rings. Also if I hear static on my...

Oh and most important is well the new stuff work with the 18D phone?

So I would still need the Partner ACS plus the Partner voice messaging module? 2 port (assuming because what is in place now is 2 ports on both modules) I just need to know so I can go ahead and order, do I really need the carrier? I noticed the carrier has different sized slots for the modules.