Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How do I configure my Sound Card

Hardware Configuration

How do I configure my Sound Card

by  mbaranski  Posted    (Edited  )
With Red Hat Linux, you can run the utility

sndconfig

from the command line (not in x-windows) as root, and it will walk you through easily setting up a PCI or ISA sound card. This is the easiest way I've seen to set up your sound card. If this does not detect it, run

pnpdump

which will give you info about your pnp devices and allow you to set them up.

Good Luck!
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top