Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Troubleshooting a PRI

Status
Not open for further replies.
foxdenprod

foxdenprod

Vendor
Jan 4, 2004
21
US
My customer has a PRI with a 40 DID's programmed into the system. The problem is this, occasionally people call in to the system and the phone just rings, and rings, and rings. The main DID is programmed to ring on all of the phones, about 30, so they would hear the phone ringing. I have tried to duplicate the problem, but of course it won't happen when a tech is around.

The local Telco is checking the problem on thier end, but any thoughts on what I need to check on my end? Any thoughts would be great.

Matt
 
Sort by date Sort by votes
how many occurences of target line are there in line /trunk programming ?

Pat Guido
NEXTIRAONE
Pat.guido@nextiraone.com

Formerly Nextira, formerly Williams Communications, formerly Wiltel, formerly Nortel networks, formerly Northern Telecom, formerly, Nynex meridian systems formerly Northern Telecom.

 
Upvote 0 Downvote
i don't understand the question. Could you expand on that for me?

Matt
 
Upvote 0 Downvote
What version software do you have?

B-Channel Service Messaging could be causing problems. Be sure to ask the telco to turn it off.

Also, we had problems with the destination code for outbound calls. After changing it from "9" to "9Any", we've had no problems.

I'd suggest doing a keyword search on PRI. There are a suprising number of posts.

Good luck!
 
Upvote 0 Downvote
when you program the target line to set you have a progrmming option for occurences of target line make sure its more than "1"

Pat Guido
NEXTIRAONE
Pat.guido@nextiraone.com

Formerly Nextira, formerly Williams Communications, formerly Wiltel, formerly Nortel networks, formerly Northern Telecom, formerly, Nynex meridian systems formerly Northern Telecom.

 
Upvote 0 Downvote
I agree, upgrade the software to the latest version. There is a maintenance release due out at the end of this month. You might as well wait for it.
 
Upvote 0 Downvote
Hey Cowenby,

Could you speak more regarding maintenance release? Is that a patch or an additional SW release?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Stephen Smith
  • Locked
  • Question
Help Troubleshooting Nortel CICS Noise on all Phones - swap positions of trunk cards
Replies
2
Views
343
curlycord
curlycord
Rick The Geek
  • Locked
  • Question
PRI Keycode availability
Replies
4
Views
168
Rick The Geek
Rick The Geek
N
  • Locked
  • Question
Need support on dial 9 Nortel MICS PRI When dial 9 display states Invalid number. Incoming DIDS work fine. Been working for years. Provider 1
Replies
6
Views
742
Nortel dino
N
htroberts
  • Locked
  • Question
anyone have a source for Norstar blank plates?
Replies
5
Views
481
jsaad
jsaad
atcom11
  • Locked
  • Question
PRI T1
Replies
2
Views
140
telcodog
telcodog

Part and Inventory Search

Sponsor

Back
Top