INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Member Login

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips now!

Talk With Other Members
Be Notified Of Responses
To Your Posts
Keyword Search
One-Click Access To Your
Favorite Forums
Automated Signatures
On Your Posts
Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

LINK TO THIS FORUM!

Tek-Tips LinkedIn^® Group

Join our
LinkedIn^® Group!

Hook up with past and present colleagues and classmates quickly.

Partner With Us!

"Best Of Breed" Forums Add Stickiness To Your Site

(Download This Button Today!)

Feedback

"...This site is a great forum to exchange knowledge..."

More...

Geography

Where in the world do Tek-Tips members come from?

Click Here To Find Out!

Tek-Tips Shirts!

Get your
Tek-Tips Forums
SWAG here!

Home > Forums > Communications Rack > Networking > Linksys networking solutions Forum

BEFW11S4

Read More Threads Like This One

tmadna (TechnicalUser)

3 Jan 03 10:10

After resetting my Linksys BEFW11S4 Router i've got the following problems:
Only the powercable is now connected, but the WLAN act and WLAN link led's stay on and the Diag led turns on and off over en over again.
Does anybody know how to solve this problem?

eihtur (TechnicalUser)

3 Jan 03 19:14

tmadna,
hi!try to turn off your PC and then turn off the router and then turn off the modem as well and then power on the modem first.wait at least a minute and then turn on the router and then turn on your computer. after that try to ping your router via the PC and then see if you can get a reply.if yes thats good.
hope this one will help you!ponytails

tmadna (TechnicalUser)

4 Jan 03 2:56

Hello,
I did the things you told me. some time ago I already did those things and everything worked out fine, but now the diag led keeps going on and off and the WLAN act and link keep burning. Also the link-led of the pcmcia-card keeps going on and off.
Can it be that the Router is crashed?
Thanks

smah (MIS)

4 Jan 03 8:17

If the router diag light keeps flashing, this usually means the firmware is not loaded correctly. Try flashing with the latest firmware.

tmadna (TechnicalUser)

4 Jan 03 9:25

Thanks until now.
But how can I flash any firmware, while there's no connection to the Router
How do I get in touch with the Router to Flash firmware.
Which cables and where do I put them from pc to Router in order to get in touch with the Router and to Flash firmware?

bobocop (TechnicalUser)

4 Jan 03 10:31

-Try to press the reset for 30 sec then after reset power cycle
-Try to ping the router (ping 192.168.1.1, if you got a reply try to flash the firmware. You can download the firmware to Linksys.com
-If you can't ping the router, try putting a static IP address on your pc IP = 192.168.1.2-254, subnet = 255.255.255.0, gateway = 192.168.1.1
-If still can't ping the router call Linksys tech 800-326-7114, maybe RMA

tmadna (TechnicalUser)

4 Jan 03 10:57

I did alread many times the resetprocedure
How and where can I ping with the Router.
Where do I fill in the data for static IP address on my pc IP = 192.168.1.2-254, subnet = 255.255.255.0, gateway = 192.168.1.1.

smah (MIS)

4 Jan 03 13:04

If you held the reset button for 30 seconds, and it's still not working there's something wrong. Time to contact Linksys.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Back To Forum

Back To Linksys networking solutions

Member Login

Come Join Us!

LINK TO THIS FORUM!

Tek-Tips LinkedIn® Group

Partner With Us!

Feedback

Geography

Tek-Tips Shirts!

BEFW11S4

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Back To Forum

Join Tek-Tips® Today!

Tek-Tips LinkedIn^® Group

Join Tek-Tips^® Today!