Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

5410 Speakerphone issue after upgrade 2

Status
Not open for further replies.
CSEguy3

CSEguy3

MIS
Jan 7, 2007
12
US
Ever since we upgraded from v3.2/IP406v2 to v9/IP500 our 5410's have had an issue with the speakerphones making a strange noise when calling internally. It starts out really soft after using the speakerphone for about a minute or two then gradually gets louder. The sound itself sounds almost like feedback. If the users hang up then redial it works fine. What could cause this? We didn't change out our digital station expansion modules because our VAR said they'd work fine moving from the IP406v2 to the IP500.

Thanks!
 
Sort by date Sort by votes
@StubbedmytoeonIPO: The phones indeed did the firmware upgrade when we brought the IP500 online.
@smokinjoe2938: I did some digging online, but wanted to confirm that this goes in NoUser->Source Numbers correct? What will this do and will it restart anything? Right now there's nothing there.
 
Upvote 0 Downvote
yes add it to the no user source number field, and you will need to then reboot the phone

 
Upvote 0 Downvote
Should 'Account Status' be disabled? I've added allow_5410_upgrade and will test and let you know.
 
Upvote 0 Downvote
Oh ok, I'll go ahead and enable account status. Should this be enabled at all times or just for this exercise?
 
Upvote 0 Downvote
So far I'm cautiously optimistic. I tried it with two users and so far so good. I'll advise further once a few more folks can try it.
 
Upvote 0 Downvote
So it seems like it's sort of fixed. Would a bad a ground cause this kind of issue? I traced out the ground from where the installer tied everything together and while it's grounded to the rack, the rack itself isn't grounded. Our 406v2 was hooked up this way with no problems but I now remember our installer saying something about the ground.
 
Upvote 0 Downvote
you do need a good ground such as building steel but not sure if this would be related to your speaker issue.

 
Upvote 0 Downvote
Is it possible the digital expansion modules didn't get fully upgraded and if so how could we check/fix it?
 
Upvote 0 Downvote
open manager and then go to control unit from there you can see your modules as well as current software release

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Yaze
  • Locked
  • Question
Visual voice issue, Application server R12, 5410 buttons.
Replies
2
Views
135
IPOTS
I
mscontinuant
  • Locked
  • Question
Distorted Greetings after upgrade to 11.1.3.1 Build 34
Replies
0
Views
121
mscontinuant
mscontinuant
dergniz
  • Locked
  • Question
License Problem with WebLM after upgrade
Replies
8
Views
291
IPOTS
I
Yaze
  • Locked
  • Question
Will 5410 and 4412 still work on release 12 ?
Replies
8
Views
148
Yaze
Yaze
sheldoom
  • Locked
  • Question
Voicemail Pro Client Unable to Access after Upgrade 1
Replies
8
Views
292
Ekster
Ekster

Part and Inventory Search

Sponsor

Back
Top