Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Unabel to login automatically in ASA to run schedule reports

Status
Not open for further replies.
Bondojordo

Bondojordo

Programmer
Nov 2, 2012
195
US
I am unable to loin automatically in ASA.
Can login manually just fine.

Trying to run scheduled reports and the error says i need an automatic login.

I can ping the server just fine. I can connect to it just fine.
my login is a dadmin superuser, that should allow all functionality.
my ports are not all used up.

any help would be greatly appreciated.
Thanks!
 
Sort by date Sort by votes
you have programmed asa for auto login correctly as it will prompt you for the password twice and pin number for the newer releases

acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.
 
Upvote 0 Downvote
correct.

The error i receive is:
"Communications error: remote reset
The connection was reset by the host. Ensure that you are still connected to the network, and that the host device is operational, then reconnect"

But again, i connect manually in ASA, ping the server and connect to the CM through the browser.
 
Upvote 0 Downvote
after you programmed auto login did you save this by hitting the floppy disc on the task bar?

acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.
 
Upvote 0 Downvote
no. but i just did and still received the same error.
Also,
I'm not sure what you mean by programming the login to run as auto, as i only assigned it as auto login through SYSTEM form the top toolbar, then PROPERTIES, and unchecked MANUAL LOGIN, entered in my credentials and selected APPLY.
 
Upvote 0 Downvote
you did it correct, but do not know why you are getting that error, maybe Avayatier3 may be able to help, he is pretty sharp!

acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.
 
Upvote 0 Downvote
ASA version?
Connection method? network ip and port, modem? ras?
Switch Hardware Platform? Definity/CM software version?

What type report or data do you want to schedule with ASA?



A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Upvote 0 Downvote
Ahh, Avaytier3. Thanks!

ASA version? - 6.0.07
Connection method? network ip and port, modem? ras? - network ip and port
Switch Hardware Platform? Definity/CM software version? - 02.1.016.4

What type report or data do you want to schedule with ASA:
display capacity
list measurements network-load day
list measurements call-summary
 
Upvote 0 Downvote
Open ASA
put check mark on Set Target System you want to connect to
click on Connect (does this log you into the SAT?)

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Upvote 0 Downvote
he said he can manually log in ok, its just the auto login will not work

acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.
 
Upvote 0 Downvote
that is correct SMOKINJOE2938.

I can connect manually. just not automatically.
All ports are opened and free.
 
Upvote 0 Downvote
System pulldown, Properties, Login

uncheck the two boxes

Login name: (your logname)
bullet in password: (logname password)
password again: (logname password)
Pin: (if logname is dadmin or a craft2 logname)

no more bullets selected

click Apply

close ASA, open ASA, check properties and see if they were saved when you clicked Apply.

System pulldown, left mouse button on Connect.


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Upvote 0 Downvote
Tested.
Settings were saved.
Failed to login automatically

Error Message - "Communications error: remote reset
The connection was reset by the host. Ensure that you are still connected to the network, and that the host device is operational, then reconnect
 
Upvote 0 Downvote
System pulldown, properties, Login tab
Defualt Connection - enter 1
post Id Type dial/Host Port

Highlight Id 1
Click Properties

bullet in Network connection and IPv4
Host: ipaddress of server Port 5022 Use SSH checked or Port 5023 no check in SSH (this will use telnet to SAT)
If you use clan IP, then Port must match the ip-services SAT port for the clan.

Advanced Tab

Login (ms): 500
Command (ms): 50
Write (ms): 0
Timeout (ms): 120000
Idle disconnect seconds: 0

Configure ssh
Deffie_Hellman AES 0

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Upvote 0 Downvote
i changed the timeout from 0 to 120000.
That allowed me to login automatically.
Scheduled my reports.
Will let you all know if they run.
Thanks!
 
Upvote 0 Downvote
schedule to run 5 minutes from now
do not close out of ASA
you can drop the connection.


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Upvote 0 Downvote
all worked.
it was the timeout setting that was not allowing me to auto login.
once i auto logged in, i was able to run reports.
thanks again everyone
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Abraham Sheehan
  • Locked
  • Question
Avaya Site Administration ( ASA)
Replies
1
Views
397
kyle555
kyle555
wpetilli
  • Locked
  • Question
ASA Import Question
Replies
1
Views
513
lopes1211
lopes1211
Jasmin Rbr
  • Locked
  • Question
unable to delete Avaya ANALOG extension from ASA/CM
Replies
3
Views
407
Wanebo
Wanebo
tweege
  • Locked
  • Question
Automatically bridge/observe 911 calls 1
Replies
4
Views
1K
JefferP
JefferP
JPidliskey
  • Locked
  • Question
Cannot locate number in ASA
Replies
13
Views
528
JefferP
JefferP

Part and Inventory Search

Sponsor

Back
Top