Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

VAL Board

Status
Not open for further replies.
wpetilli

wpetilli

Technical User
May 17, 2011
1,877
US
I'm running CM6.1 and I just got a VAL board. I put the IP in the node-name table and added the ip-interface. I've seen older posts about setting up a data module. Is that still required? If so it says to set the type to be 'ethernet'. That doesn't exist as a choice. Announcement is a choice. Anyone have the exact steps for this? I have one in another system and don't have a data module configured so not sure if it's required or what it's actually used for.

Also, on the ip-interface page there's a field for 'ethernet link'. What goes in there?
 
Sort by date Sort by votes
cm5 and higher software adds datamods in the background and Ethernet datamods can no longer be added with admin.

In cm5.2 and higher the tn2501 no longer needs a programmed ethernet data-module

Need node-name + ipaddress for val ip-interface node-name and val ip-interface
gateway

Ethernet connections are still necessary but not user programmable via the
administer data-module form. Upgrades to cm5.2 and higher convert the old
data-module, node-names, gateway, communication-links to the new format.
These ethernet connections are for .wav file backup and restore, and for the
file transfers for upgrading / downgrading firmware.

Going forward, the user administration is on the ip-interface form, and
node-names form. You will no longer use an extension assigned to an ethernet
data-module.
Code: 
----------------------------------------
list configuration board 6a04

                              SYSTEM CONFIGURATION

Board                                                     Assigned Ports
Number   Board Type              Code     Vintage    u=unassigned t=tti p=psa

06A04    VAL-ANNOUNCEMENT        TN2501AP HW13 FW016 01 02 03 04 05 06 07 08
                                                     09 10 11 12 13 14 15 16
                                                     17 18 19 20 21 22 23 24
                                                     25 26 27 28 29 30 31 32
                                                     33 34
----------------------------------------
display communication-interface links                           Page   1 of  15

                                INTERFACE LINKS
Link Enab Est Ext          Type  Dest.             Conn.    Name (20 characters)
          Conn                   Number            Module

  9:  y   n                ETHER                            VAL BOARD 06A04
----------------------------------------
display ip-interface 6a04                                       Page   1 of   2
                                  IP INTERFACES


                  Type: VAL
                  Slot: 06A04
           Code/Suffix: TN2501
      Enable Interface? y





                                 IPV4 PARAMETERS
             Node Name: val6a04
           Subnet Mask: /24
     Gateway Node Name: Gateway006

         Ethernet Link: 9
         Network uses 1's for Broadcast Addresses? y
----------------------------------------
list node-names v4                                                     Page   1

                        NODE NAMES

Type     Name              IP Address
IP       Gateway006        10.32.15.1
IP       val6a04           10.32.15.6
----------------------------------------
list ethernet-options                                                  Page   1

                               ETHERNET OPTIONS
Enable
Eth Pt  Type   Slot   Code   Sfx    Auto     Speed     Duplex
------  ----   ----   ----   ---    ----     -----     ------
   y    VAL    06A04  TN2501         y
----------------------------------------
get ethernet-options 6a04

                         GET ETHERNET OPTIONS

                             Administered        Actual

         Auto-Negotiate?     y                   y
                  Speed:     NA                  100 Mbps
                 Duplex:     NA                  Full
         Link Integrity:                         Active
----------------------------------------
display port 06A0433
                                 PORT INFORMATION

                                     Port: 06A04033

                           Equipment Type: Clan Ethernet Link
                           Identification: IPv4 Link 9
----------------------------------------
display port 06A0434
                                 PORT INFORMATION

                                     Port: 06A04034

                           Equipment Type: Control-Lan
                           Identification: RSCL
[\code]



A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
Avaya. Too little or no help? Expensive?
For FAST switch support at bargain rates, give bsh a call.

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[url=http://bshtele.com][URL unfurl="true"]http://bshtele.com[/URL][/url]
 
Upvote 0 Downvote
Code: 
In cm5.2 and higher the tn2501 no longer needs a programmed ethernet data-module

Need node-name + ipaddress for val ip-interface node-name and val ip-interface
gateway

Ethernet connections are still necessary but not user programmable via the
administer data-module form. Upgrades to cm5.2 and higher convert the old
data-module, node-names, gateway, communication-links to the new format.
These ethernet connections are for .wav file backup and restore, and for the
file transfers for upgrading / downgrading firmware.

Going forward, the user administration is on the ip-interface form, and
node-names form. You will no longer use an extension assigned to an ethernet
data-module.
----------------------------------------
list configuration board 6a04

                              SYSTEM CONFIGURATION

Board                                                     Assigned Ports
Number   Board Type              Code     Vintage    u=unassigned t=tti p=psa

06A04    VAL-ANNOUNCEMENT        TN2501AP HW13 FW016 01 02 03 04 05 06 07 08
                                                     09 10 11 12 13 14 15 16
                                                     17 18 19 20 21 22 23 24
                                                     25 26 27 28 29 30 31 32
                                                     33 34
----------------------------------------
display communication-interface links                           Page   1 of  15

                                INTERFACE LINKS
Link Enab Est Ext          Type  Dest.             Conn.    Name (20 characters)
          Conn                   Number            Module

  9:  y   n                ETHER                            VAL BOARD 06A04
----------------------------------------
display ip-interface 6a04                                       Page   1 of   2
                                  IP INTERFACES


                  Type: VAL
                  Slot: 06A04
           Code/Suffix: TN2501
      Enable Interface? y





                                 IPV4 PARAMETERS
             Node Name: val6a04
           Subnet Mask: /24
     Gateway Node Name: Gateway006

         Ethernet Link: 9
         Network uses 1's for Broadcast Addresses? y
----------------------------------------
list node-names v4                                                     Page   1

                        NODE NAMES

Type     Name              IP Address
IP       Gateway006        10.32.15.1
IP       val6a04           10.32.15.6
----------------------------------------
list ethernet-options                                                  Page   1

                               ETHERNET OPTIONS
Enable
Eth Pt  Type   Slot   Code   Sfx    Auto     Speed     Duplex
------  ----   ----   ----   ---    ----     -----     ------
   y    VAL    06A04  TN2501         y
----------------------------------------
get ethernet-options 6a04

                         GET ETHERNET OPTIONS

                             Administered        Actual

         Auto-Negotiate?     y                   y
                  Speed:     NA                  100 Mbps
                 Duplex:     NA                  Full
         Link Integrity:                         Active
----------------------------------------
display port 06A0433
                                 PORT INFORMATION

                                     Port: 06A04033

                           Equipment Type: Clan Ethernet Link
                           Identification: IPv4 Link 9
----------------------------------------
display port 06A0434
                                 PORT INFORMATION

                                     Port: 06A04034

                           Equipment Type: Control-Lan
                           Identification: RSCL

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
Avaya. Too little or no help? Expensive?
For FAST switch support at bargain rates, give bsh a call.

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

itsonlydialtone
  • Locked
  • Question
VAL
Replies
0
Views
67
itsonlydialtone
itsonlydialtone
bankingguy
  • Locked
  • Question
Egypt sample DS1 board configuration (Telecom Egypt)
Replies
1
Views
100
ZeroZeroOne
ZeroZeroOne
frvavaya
  • Locked
  • Question
SNMP OID Name code for Avaya Session Board Control SBCE
Replies
2
Views
167
frvavaya
frvavaya
sandeep77
  • Locked
  • Question
D channel for all DS1 board out of servive 1
Replies
15
Views
266
AvayaTier3
AvayaTier3
Avayacoolstuff
  • Locked
  • Question
Upload wav file to Val board
Replies
1
Views
88
kyle555
kyle555

Part and Inventory Search

Sponsor

Back
Top