Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

problem with the password on cs1000 rls 7.5

Status
Not open for further replies.
Supportvzla

Supportvzla

Technical User
Oct 9, 2002
137
VE
As I can reset the password to log in on Avaya Rls 7.5, which had all the password configured not expire,and whatever now all expired and do not ask me to change it, but it tells me that all password are invalid.

what can i do.

regards
 
Sort by date Sort by votes
Hello Supportvzla,

I think on that issue you will need to recover your Linux passwords by booting your UCM Server from your install media and at the boot promt you need to type in: "recovery-com1, so you can recover your admin2 and root password

regards
Fritz
 
Upvote 0 Downvote
Here are some notes I have on doing it that I have collected from a few different posts here;

Lost all System Passwords (UCM and CS)
Recovery:
Linux base CLI (reset nortel and root passwords)
1. Insert the linux base install media into the server
2. Reboot the Server
3. At the “boot:” prompt type recovery-com1 (10 seconds to start typing)
4. Select the menu items to reset the root and nortel passwords
5. Follow those steps to reset
6. Then choose the reboot option once finished
7. Remove the install media while rebooting
8. Validate passwords on CLI


Check out my professional profile and connect with me on LinkedIn.
 
Upvote 0 Downvote
good morning, after do this

1. Insert the linux base install media into the server
2. Reboot the Server
3. At the “boot:” prompt type recovery-com1 (10 seconds to start typing)
4. Select the menu items to reset the root and nortel passwords
5. Follow those steps to reset
6. Then choose the reboot option once finished
7. Remove the install media while rebooting
8. Validate passwords on CLI

Which is the root and nortel password? and i have no any effect over the database in the PBX?

Regards
 
Upvote 0 Downvote
Your root and admin2 password are set during the Linux installation. Not sure you can change those without reinstalling Linux.
 
Upvote 0 Downvote
KCFLHRC - You can, you just need to boot from the Linux media. Then you can login with those accounts and reset all your user logins.

Check out my professional profile and connect with me on LinkedIn.
 
Upvote 0 Downvote
You can change the root/admin2 password via linux CLI. Issue the command "passwd root (or admin2)" as the root user and it will prompt you for the password change.
 
Upvote 0 Downvote

we did the precedure and we could recovery the linux password, but i can not recovery the admin2 password, since Linux can we reset the admin2 password?

Pls

Thank for you help
 
Upvote 0 Downvote
It should give you the following options when you type recovery-com1 or recovery-kvm (depends on how you connect)

1. Boot loader recovery
2. Password Recovery
3. ...yada yada

You will choose option 2 and you should be prompted with:

Password recovery:
You may change password one of the following users:
1. root
2. admin2
3. exit
Select and option (1-3) You should pick 2 here.


I have done this on a 7.5 system with no issues. Are you not seeing these?



John Anaya
Signet6 Network Sciences
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services

Public Profile
 
Upvote 0 Downvote
I'm thinking he is trying to recover the Admin 2 on the PBX, not the Linux.
 
Upvote 0 Downvote
check if the system has unregistered from the UCM. Try the default password for admin2, in the PBX?

What type of Server configuration are you running? If you are running a CPPM/CPDC or a CPMGS and you have a compact flash or USB with software try the password recovery method in

NN43001-604, 05.03
March 2011

Page 209.

This process may work, but I am not sure on a co-res environment. Haven't run into this problem.

John Anaya
Signet6 Network Sciences
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services

Public Profile
 
Upvote 0 Downvote
Yes, this is the menu that i have.

We did it again in this moment is coming up, to do the test.

we did it, its work.

but we can not log in in the pbx,

 
Upvote 0 Downvote
ok, you may have to reset the admin password on the UCM.

NN43001-116, 05.08 Page 66 will show you how to reset the UCM admin password.

Then use the UCM login and password to get into the PBX.

John Anaya
Signet6 Network Sciences
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services

Public Profile
 
Upvote 0 Downvote
If your PBX is not joined to the Security Domain however, you will need the original admin2 password to join it to the Security Domain.
 
Upvote 0 Downvote
the problem is, that i have not access to the UCM,

I am in security configuration, in member server

Like if i have to make the configuration initial.

The pbx is working, but i have problem with E1 outgoning,

Regards

 
Upvote 0 Downvote
thanks at everybody, we could to recovey the password to password to linux ant PBX.

We use the UCM web interface from NN43001-116.

Thanks again
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

HollTel
  • Question
TTY - PMS connection not working - Nortel CS1000 Rls 7.0 4
2
Replies
29
Views
2K
MossEng
MossEng
VRRyan
  • Locked
  • Question
Finding password to CS1000 5.5 SSC
Replies
2
Views
272
Firebird Scrambler
Firebird Scrambler
Trason
  • Question
e911 on rls 7 where to start
Replies
2
Views
284
bignose21
bignose21
HollTel
  • Locked
  • Question
TTY not working on a CS1K Rls. 7.0
Replies
2
Views
252
HollTel
HollTel
LittleMaster
  • Locked
  • Question
Cs1000 Rls 4.5 patches needed 1
Replies
3
Views
193
LittleMaster
LittleMaster

Part and Inventory Search

Sponsor

Back
Top