INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Member Login

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips now!

Talk With Other Members
Be Notified Of Responses
To Your Posts
Keyword Search
One-Click Access To Your
Favorite Forums
Automated Signatures
On Your Posts
Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

LINK TO THIS FORUM!

Tek-Tips LinkedIn^® Group

Join our
LinkedIn^® Group!

Hook up with past and present colleagues and classmates quickly.

Partner With Us!

"Best Of Breed" Forums Add Stickiness To Your Site

(Download This Button Today!)

Feedback

"...I love this site! It's so nice to know that there are so many people out there who are willing to share their knowledge..."

More...

Geography

Where in the world do Tek-Tips members come from?

Click Here To Find Out!

Tek-Tips Shirts!

Get your
Tek-Tips Forums
SWAG here!

Home > Forums > Wiring Closet > Phone Systems > Avaya: IP Office Forum

DS30 expansion unit is solid red leds

Read More Threads Like This One

ipopartner (Programmer)

3 Jul 12 16:26

Out of the box expansion module DIG DCPx30 V2 with a Solid red light only- not even blinking.. The ip office is not seeing the unit.. Any ideas?

Thank you
Sam

ACIS
ACSS

intrigrant (Programmer)

3 Jul 12 16:37

connect a serial cable between the unit and the pc, open a comms prog ( like putty ) 38400,8,N,1 and power up the unit.
If you get the bootloader then the unit has no firmware.
There are a few things to try :
connect to a IPO and type ATX in putty, the unit may try to load the firmware dependig of a number of things:
Pre IPO 500v2 : manager must be running and tftp must be enabled, the path to the binaries must be correct and in the ipo manager must be set as the tftp server
IPO 500v2 the SD card must be set as the file manager
If it doesnt work then make sure that in the config you have the same unit programmed as you connect.
make a offline config and select the expansion module you have on the port you connect it, save the new config and try all above again

If nothing works then it is a DOA and send it back to Avaya/your reseller

If it ain't dutch it ain't much

ipopartner (Programmer)

3 Jul 12 16:48

Thank you Intrigrant, I believe the firmware on the box is corrupted as the unit is only showing a solid Red Leds so the programming on the IPO is not a problem at this point I think.
I will try to ATX to the unit and will send you a XL size Pizza if it works .. lol

Thank you
Sam

ACIS
ACSS

piethief (Programmer)

3 Jul 12 19:13

Send it back.

intrigrant (Programmer)

3 Jul 12 23:44

I alway try to restore it before sending back, in all cases were the bootloader shows up and the prompt is stable ( no messages rolling ) I was able to reload the software.
Saves money for shipping and handling and it is for the fun also

If it ain't dutch it ain't much

tlpeter (Programmer)

4 Jul 12 1:07

Indeed, it is almost not a DOA but just without software.

BAZINGA!

I'm not insane, my mother had me tested!

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Back To Forum

Back To Avaya: IP Office