BCM50 iternal call between some time only

SabooTB · Mar 1, 2012

Hello,

I'm new at this system.
I set up most things but I have big problem with one thing.

I have one phone set which I want to set up as a internal phone between 8AM and 7PM so noone can call from this phone and it will not ringing between those hours.
Between 7:01PM and 7:59AM it have to work normally (it will ring normally and You cann call from this set).

Any ideas?

ironhorse17 · Mar 1, 2012

Set night ring for that phone, it could also be the control phone.

Then set up a cos with password to dial out.

SabooTB · Mar 1, 2012

I dont need passowrd - between those hours it can be use normally.
How to set up night ring?
Where is it?

allworxguy · Mar 1, 2012

You have set a dialing filter that activates during the normal mode only, but be aware you you can't stop the phone from being called.

For advice on how to do this go to the BCM forum.

Marv

http://www.telemarv.ca

ironhorse17 · Mar 1, 2012

You have to add from nothing to something, meaning default no outgoing calls and with a password allow calls.

Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

BCM50 iternal call between some time only

SabooTB

MIS

ironhorse17

Technical User

SabooTB

MIS

allworxguy

Vendor

ironhorse17

Technical User

Similar threads

Part and Inventory Search

Sponsor