I am having an identical problem at 3 different locations. All have a 1616i with 3 BM32's at their reception desk. At least once a day and sometimes more, the BM32's reset. The lights go out, then it syncs back up and works fine. We have replaced the phone, power supply and all 3 BM32's at one of the locations but the problem still occurs. Has anyone run into this or have any other ideas on how to correct this problem? Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
1616i w/ 3 BM32's
- Thread starter cplatt7
- Start date
There some new firmware for the 1600 serie phones and BM32 modules.
ftp://ftp.avaya.com/incoming/Up1cku9/tsoweb/1600/101411/16xx-IPT-H323-R1_3_1-093011.zip
Now sure if this fixes your issue but you can give it a try.
BAZINGA!
I'm not insane, my mother had me tested!
www.lantel.nl
ftp://ftp.avaya.com/incoming/Up1cku9/tsoweb/1600/101411/16xx-IPT-H323-R1_3_1-093011.zip
Now sure if this fixes your issue but you can give it a try.
BAZINGA!
I'm not insane, my mother had me tested!
www.lantel.nl
- Thread starter
- #3
They work fine on IPO, have the for a test on my desk for 3 weeks now. Swap the second and the third BM32 only the fist and the second get the upgrade file the third won't so when you have 3 BM32 after thay are upgraded swap the 2nd and 3th. You can check the firmware of all the button module in the menu on the phone and you also see if they are all connected.
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged (Avaya Search tool )
______________________________________
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged (Avaya Search tool )
______________________________________
- Status
Similar threads
- Question
