Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Phone will not accept Crss-alert on 9650IP set 2

Status
Not open for further replies.

FonTaz

MIS
Jul 15, 2008
40
0
0
US
We are running CM 5.2 and I am trying to program a Crss-alert button on acouple of 9650 phones. The error message I am getting is:
Button type does not meet min or max requirements.
does anyone know what that is all about and how to by pass it?
thanks in advance
 
I ran into this error and found that you can only have 10 sets with the button. Try removing it from one set and add it to see if the error clears.

Hope this helps
ED

1a2 to ip I seen it all
 
Note - there is a green feature from Avaya that will expand the amount of crisis alert button assignments you can have (I believe it is over 200). Check with Avaya or your Business Partner...I believe the # is SA8608.
 
Button type does not meet min or max requirements

change system-parameters special-applications Page 4 of 8

(SA8608) - Increase Crisis Alert Buttons (S8700 only)? n

SA8608 - Increase Crisis Alert Buttons S8700 only
Currently, CM is limited to 10 Crisis Alert stations on the S8700 platform.
(This is in addition to the 28 Attendant Console capacity), each of whom may
have a Crisis Alert button. This enhancement will expand the capabilities of the
S8700 platform to allow for up to 250 total Crisis Alert stations.


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting
 
Awesome Info thank you very much. I just love this site.
I was not aware that there were limits on the Crss-alert button.
Appreciate your knowledge.
 
You should be able to change this and activate the SA

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting
 
Thanks Avaya Tier3 I pulled up the change system-parameters like you suggested and I do not have (SA8608) as an option. I do have (SA7409b) Enhanced Emergency Alert is that the same?
Also there is a warning at the top that says any changes to these fields could result in unpredictable system behavior. Do I need to be concerned.
thanks again.
 
Avaya Tier3 sorry shot the answer too soon. I did find what you said to change. Question still. Do I need to be concerned about the warning.
thanks again
 
You can ignore the warning for turning on this feature.



A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top