7 Oct 11 13:45
I use a 2509 as both my terminal server and, presently as the hub in a frame-relay spoke-and-hub lab running RIP. I am NOT using sub-interfaces and have not specifically turned off split-horizon; yet I am getting RIP routing updates to both spokes. Is the IOS too old to support split-horizon on this router? I guess I can re-configure to make a different (newer 2610XM) router the hub...
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-C-L), Version 12.2(32), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Fri 02-Dec-05 16:16 by
Image text-base: 0x030417AC, data-base: 0x00001000
ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
BOOTLDR: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE SOFTWARE (fc1)
2509_T-SERVE_R1 uptime is 3 hours, 20 minutes
System returned to ROM by power-on
System image file is "flash:c2500-c-l.122-32.bin"
cisco 2509 (68030) processor (revision L) with 6144K/2048K bytes of memory.
Processor board ID 05364283, with hardware revision 00000000
SuperLAT software (copyright 1990 by Meridian Technology Corp).
X.25 software, Version 3.0.0.
TN3270 Emulation software.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
8 terminal line(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102