attendant M2250 issue 1

jertson · Oct 3, 2011

hi all,

when a call is presented on attendant console M2250, upon answering by the operator then call will be transfered to an extensions or a user, if the calling party is not answered by the user, calls will be recalled to same console which transfer the call.

my system is CS1000M Rls. 6.00R, my question, is it possible after
the call has been transfer to the user, it will not be recalled to
the same console, and the call will just terminate once the calling
party hang up the call.

any suggestion

GHTROUT · Oct 4, 2011

Look at LD 21 in the TIM_DATA section. Note the three numbers after RTIM.

Go to LD 15 and REQ CHG ; TYPE TIM ; then at RTIM, enter 378 510 510

--
Nortel Resources at GHTROUT.com World Famous!
--

GHTROUT · Oct 4, 2011

Sorry, you can also do RTIM 0 0 0 - that will disable it.

I was still asleep at the switchboard when I wrote.

--
Nortel Resources at GHTROUT.com World Famous!
--

jertson · Oct 4, 2011

dear all,

i was upgrading an opt 11 system rel. 25.40 to CS1000E rls. 7.5, the cpu card i'm using is CPMGS, a CoRes, deployment was succesful, but when i try to join the security domain, it gives problem, it say's fail to register, i was using the command in ld 117 reg u s, the oher option is through mgc port by the command, joinsecdomain

suggestions please...

Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

attendant M2250 issue 1

jertson

Vendor

GHTROUT

IS-IT--Management

GHTROUT

IS-IT--Management

jertson

Vendor

Similar threads

Part and Inventory Search

Sponsor