Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Magix international calling
- Thread starter fedphone
- Start date
TouchToneTommy
Vendor
Take a look at the FAQ section of this forum. There is a document on initial programming and another on troubleshooting. Print your PRI information so you have a reference.
tdaugirdas
Technical User
When you say you cannot make "international" calls - what do you mean?? What happens when you try to dial an international call? What line pool are the PRI channels in? If they are not in Pool 70 (which is the default pool for international calls) - you would need to change the default pool for international calls.
What does the PRI provider "see" on their end - when you dial an international number?
You could have a number of different issues.
Tom Daugirdas,
President
STCG, Inc.
stcg.com
What does the PRI provider "see" on their end - when you dial an international number?
You could have a number of different issues.
Tom Daugirdas,
President
STCG, Inc.
stcg.com
Telecomboy
Programmer
Do a print of your PRI. Look at the special services table. Entry 0 is your 011 (or international) dialing. See if it is set to delete 3 digits. If so, you are not sending the 011 to the provider. If your provider needs the 011, you need to change that entry to delete 0 vs. delete 3 under your PRI programming. If they don't want to see the 011, you need that entry to be to delete 3 digits so it strips that off.
- Status
Similar threads
- Locked
- Question
- Locked
- Question