Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SIP Mode Dialog 4422
- Thread starter EA1DDO
- Start date
- Thread starter
- #3
Hi etompau,
The version on the sticker is DBC 422 02/01001 R2F
On the settings menu I can read H323 mode.
But I try C*4 when switching on, during the five seconds countdown, and nothing, I can not get into admin mode.
Could be the password has been changed?
Can I reset it to factory specs?
Thank you very much
Max.
The version on the sticker is DBC 422 02/01001 R2F
On the settings menu I can read H323 mode.
But I try C*4 when switching on, during the five seconds countdown, and nothing, I can not get into admin mode.
Could be the password has been changed?
Can I reset it to factory specs?
Thank you very much
Max.
- Thread starter
- #5
Hi,
Yes, I got to enter in the admin mode, but I can not found the option SIP/H323.
Anyway, may be someone can answer next question.
Is the Dialog 4422 good to use in a home SIP system?
My idea is to install a small SIP system at home. I already got a SIP server account. There is a router DD-WRT or Open WRT next to the DSL modem.
So, Can I connect the Dialog 4422 to the SIP port?
or it should be a different IP phone model?
Thank you.
Yes, I got to enter in the admin mode, but I can not found the option SIP/H323.
Anyway, may be someone can answer next question.
Is the Dialog 4422 good to use in a home SIP system?
My idea is to install a small SIP system at home. I already got a SIP server account. There is a router DD-WRT or Open WRT next to the DSL modem.
So, Can I connect the Dialog 4422 to the SIP port?
or it should be a different IP phone model?
Thank you.
Hi,
I have the same question.
I would like to use Ericsson Dialog 4422 (sticker under the phone mention is DBC 422 02/01001 R2F) with Asterisk.
I can see Protocol (Auto(H323)) mentioned in network settings view, but can't see and choose it when in administrator mode.
Is it possible that the change is auto adaptive to the server ?
Does any one knows about that ?
Thank you for your help.
I have the same question.
I would like to use Ericsson Dialog 4422 (sticker under the phone mention is DBC 422 02/01001 R2F) with Asterisk.
I can see Protocol (Auto(H323)) mentioned in network settings view, but can't see and choose it when in administrator mode.
Is it possible that the change is auto adaptive to the server ?
Does any one knows about that ?
Thank you for your help.
- Thread starter
- #7
Changing the protocol in a DBC 422:
1. Press the "Settings" key (Upper right function key)
2. Scroll in the menu with + and - keys until "Network" is highlighted.
3. Select the function with the loudspeaker key.
4. Activate admin mode with C * 5 (indicated by a short ring signal)
5. Scroll with + and - keys until Protocol menu is highlighted.
6. Select with loudspeaker key.
7 Chnage protocol with + and - keys. Enter with loudspeaker key
8. Exit the menu with C key.
N.B a too old FW in the phone may not support SIP.
I would say that the DBC 422 is no good for "SIP home use".
1. Press the "Settings" key (Upper right function key)
2. Scroll in the menu with + and - keys until "Network" is highlighted.
3. Select the function with the loudspeaker key.
4. Activate admin mode with C * 5 (indicated by a short ring signal)
5. Scroll with + and - keys until Protocol menu is highlighted.
6. Select with loudspeaker key.
7 Chnage protocol with + and - keys. Enter with loudspeaker key
8. Exit the menu with C key.
N.B a too old FW in the phone may not support SIP.
I would say that the DBC 422 is no good for "SIP home use".
etompau
Great, it works !
My telephon installer and I did not knew that admin mode could be entered by this way.
Thank you for the tip.
One more thing, if you please.
Can you develop 'I would say that the DBC 422 is no good for "SIP home use".'
I intend to use DBC 422 with Asterisk in replacement of our Ericsson MX-One for a business use, but i am curious to know why DBC 422 is no good for SIP home use ?
Great, it works !
My telephon installer and I did not knew that admin mode could be entered by this way.
Thank you for the tip.
One more thing, if you please.
Can you develop 'I would say that the DBC 422 is no good for "SIP home use".'
I intend to use DBC 422 with Asterisk in replacement of our Ericsson MX-One for a business use, but i am curious to know why DBC 422 is no good for SIP home use ?
- Thread starter
- #11
Hi,
Etompau, great guide !! Thank you so much.
Now, to be more specific...
Can I use the Dialog 4422 (in SIP mode) with this;
Thank you again.
Etompau, great guide !! Thank you so much.
Now, to be more specific...
Can I use the Dialog 4422 (in SIP mode) with this;
Thank you again.
- Thread starter
- #13
Etompau, many thanks for your help, anyway.
I got into the admin mode, I have been playing with IPs with no success.
I just got a SIP account; 12345@sarenet.com where 12345 is my user and there is a password too. No IPs, nothing else.
For softphones works good.
Now I did those settings into my DD-WRT MilkFish SIP router (LinkSys WRT54G) but I can not get the Dialog4422 working with that configuration.
So, I am going to buy a "normal" SIP phone, Snom style, and try again.
Thank you again.
PD. If anyone is interested...I'll sell the Dialog4422.
I got into the admin mode, I have been playing with IPs with no success.
I just got a SIP account; 12345@sarenet.com where 12345 is my user and there is a password too. No IPs, nothing else.
For softphones works good.
Now I did those settings into my DD-WRT MilkFish SIP router (LinkSys WRT54G) but I can not get the Dialog4422 working with that configuration.
So, I am going to buy a "normal" SIP phone, Snom style, and try again.
Thank you again.
PD. If anyone is interested...I'll sell the Dialog4422.
Multivitamin86
Technical User
after changing it to SIP try logging into the phone via the browser to setup the remainder of you settings.
Default password will be Ericsson or Telephone
Default password will be Ericsson or Telephone
- Status
Similar threads
- Locked
- Question