Hi Guys,
I have a 9641g handset here and i am trying to get the backup/restore process working on it.
I am using Avaya MvIPTel file server but i cannot seem to get the backups/restores working. The phone gets its upgrade settings and 46xx settings ok but will not backup/restore contacts.
I have set up the backup and restore settings as follows:
################# BACKUP/RESTORE SETTINGS ################
##
## Backup and Restore URI
## URI used for HTTP backup and retrieval of user data.
## Specify HTTP server and directory path to backup file.
## Do not specify backup file name.
## BRURI is not supported on 96xx, 16cc and 1603 SIP phones.
SET BRURI ##
## Backup/Restore Authentication
## Specifies whether authentication is used for backup/restore file download.
## Call server IP address and telephone's registration can be used as credentials.
## 0: Call server IP address and telephone's registration password
## are not included as credentials.
## 1: The call server IP address and the telephone’s registration
## password are included as the credentials in an Authorization request-header
SET BRAUTH 0
##
My SNMP settings are as follows:
## Note : This setting is applicable for 1603 SIP phones also.
## SET SNMPADD 192.168.0.22,192.168.0.23
##
## SNMP community name string
## This value must be set to enable viewing of the phone's
## MIB. This value must match the community string name
## used in the SNMP query (up to 32 ASCII characters, no
## spaces).
## Note : This setting is applicable for 1603 SIP phones also.
SET SNMPSTRING public
##
##
I have also set up my restore settings as:
## FTPDIR specifies the default directory path used for
## storage and retrieval of phone user information.
## Depending on FTPUSERSTAT setting, may be overridden by
## the user.
##
SET RESTORESTAT 1
## SET FTPUSERSTAT 1
## SET FTPSRVR 135.18.18.18
## SET FTPDIR myftpdir
##
Has the option for a manual backup been removed from the later firmware versions as back on rel 2.0 you had the Manual backup option under advanced settings or do i need to turn this on in the settings file, if so then does anybody know how??
Any help appreciated
Thanks
I have a 9641g handset here and i am trying to get the backup/restore process working on it.
I am using Avaya MvIPTel file server but i cannot seem to get the backups/restores working. The phone gets its upgrade settings and 46xx settings ok but will not backup/restore contacts.
I have set up the backup and restore settings as follows:
################# BACKUP/RESTORE SETTINGS ################
##
## Backup and Restore URI
## URI used for HTTP backup and retrieval of user data.
## Specify HTTP server and directory path to backup file.
## Do not specify backup file name.
## BRURI is not supported on 96xx, 16cc and 1603 SIP phones.
SET BRURI ##
## Backup/Restore Authentication
## Specifies whether authentication is used for backup/restore file download.
## Call server IP address and telephone's registration can be used as credentials.
## 0: Call server IP address and telephone's registration password
## are not included as credentials.
## 1: The call server IP address and the telephone’s registration
## password are included as the credentials in an Authorization request-header
SET BRAUTH 0
##
My SNMP settings are as follows:
## Note : This setting is applicable for 1603 SIP phones also.
## SET SNMPADD 192.168.0.22,192.168.0.23
##
## SNMP community name string
## This value must be set to enable viewing of the phone's
## MIB. This value must match the community string name
## used in the SNMP query (up to 32 ASCII characters, no
## spaces).
## Note : This setting is applicable for 1603 SIP phones also.
SET SNMPSTRING public
##
##
I have also set up my restore settings as:
## FTPDIR specifies the default directory path used for
## storage and retrieval of phone user information.
## Depending on FTPUSERSTAT setting, may be overridden by
## the user.
##
SET RESTORESTAT 1
## SET FTPUSERSTAT 1
## SET FTPSRVR 135.18.18.18
## SET FTPDIR myftpdir
##
Has the option for a manual backup been removed from the later firmware versions as back on rel 2.0 you had the Manual backup option under advanced settings or do i need to turn this on in the settings file, if so then does anybody know how??
Any help appreciated
Thanks
