Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

One Touch Internal Transfer

Status
Not open for further replies.

MattDesCom

Vendor
Jan 26, 2010
2
CA
I recently installed an IP Office 500 R6.0 with 5-1416 series sets.

The customer would like to use some of those buttons for a one touch transfer to other sets. They would also like the LED lights to display if that extension is using the phone(Similar to having line appearences on the sets).

I have looked through the IP Office Knowledge base but I can not find a exact answer.

Is this possible ?

I've worked on many nortel systems and it was just a simple feature code on an open button. I am newer to avaya.
 
Button Programming tab
Action = User
Action Data = User extension
 
For the one touch transfer you need to add a source code per user who needs it:


2.1 One Touch Transfer
This new feature allows a user to initiate the transfer of a connected call by pressing a programmed telephone feature button. The following feature buttons are supported with this new feature:
• User
• Dial
• Emulation>Abbreviated Dial
• Emulation>Automatic Intercom
• Emulation>Dial Intercom
• Advanced>Dial Direct
This feature is enabled on a per user basis by using the “Enable_OTT” source number. This feature is supported on the following telephones:
• 1608 / 1616
• 5410 / 2410 / 5420 / 2420
• 5610 / 4610 / 5620 / 4620 / 5621 / 4621
• 4625
• 4406 / 4412 / 4424
• 6408 / 6416 / 6424
COMPAS

Homo sapiens non urinat in ventum

honey, i fried the IP Office !!!

Sarcasm, it's only one of the services I offer.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top