Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
406v2 PCS level
- Thread starter jcosgrove
- Start date
PlatinumGuy
Instructor
No you dont.
The PCS level isnt neccesarily the root of this, if you have enough memeory in your 406v2 the pcs level is not relevant.
Connect to the system using monitor and when you get the lines of info that tell you what cards are in the system etc you will see freemem=
If your memory is around 55-60meg you have a 64 meg system and that is fine.
If you have more like 20-30 meg you dont and that needs upgrading.
There is also a bug at play here in that when you connect with monitor to a 2.1 27 system (the version that all systems are shipped with) it will report the freemem incorrectly. You need to upgrade to 2.1 35 to rectify this error so that it will report the mem incorrectly. If you try and upgrade a new pcs10 406 while it is on 2.1 27 it will reject it based on the pcs level, in actuality it is this bug that makes it do this and once you upgrade to somethi ng above 2.1 27 you should be able to upgrade without any further complications.
ACA - IP Office Implement
ACS - IP Office Implement
ACE - IP Office Implement
The PCS level isnt neccesarily the root of this, if you have enough memeory in your 406v2 the pcs level is not relevant.
Connect to the system using monitor and when you get the lines of info that tell you what cards are in the system etc you will see freemem=
If your memory is around 55-60meg you have a 64 meg system and that is fine.
If you have more like 20-30 meg you dont and that needs upgrading.
There is also a bug at play here in that when you connect with monitor to a 2.1 27 system (the version that all systems are shipped with) it will report the freemem incorrectly. You need to upgrade to 2.1 35 to rectify this error so that it will report the mem incorrectly. If you try and upgrade a new pcs10 406 while it is on 2.1 27 it will reject it based on the pcs level, in actuality it is this bug that makes it do this and once you upgrade to somethi ng above 2.1 27 you should be able to upgrade without any further complications.
ACA - IP Office Implement
ACS - IP Office Implement
ACE - IP Office Implement
@platinumguy
i know what your thinking
you think he neds to know if he can upgrade to 4.0
but that was not the question
you don't go to the next round
ACA - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
i know what your thinking
you think he neds to know if he can upgrade to 4.0
but that was not the question
you don't go to the next round
ACA - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
PlatinumGuy
Instructor
tlpeter - noted
Its just a very common question i get about three times a day now. Thats why i jumped the gun.
ACA - IP Office Implement
ACS - IP Office Implement
ACE - IP Office Implement
Its just a very common question i get about three times a day now. Thats why i jumped the gun.
ACA - IP Office Implement
ACS - IP Office Implement
ACE - IP Office Implement
- Status
Similar threads
- Locked
- Question