Siemens HCM300/9006i to Nortel PRI 1

DoctorTouchtone · Apr 29, 2007

Have a 9006i/HCM300 V6.5..currently connected to a Nortel Opt11 via T1 over fiber...want to change it to PRI so we can pass CLID between the switches. What would be the best setup on that (I know it can work NI2..but what is the best way to set it up)? I want to make the HCM the "CO" end of the PRI and the Nortel will also tie to another Opt11 (currently also tied via T1 but want to do it to PRI as well).....
Thanks!

hotwalker57 · May 1, 2007

Worked on this before, unless both procalls are QSIG no caller ID can be passed, sorry. Not sure if 6.5 can run QSIG.

dartlvr · May 8, 2007

Yes the 9.6 can do Qsig we have it set up to a option 61 and it works great.

DoctorTouchtone · May 8, 2007

Dartlvr,
I think the 9006i is 6.5 or 6.6...but I know 6.3 could not do Qsig...when did they add Qsig?? If so, I would like to talk to you in pvt about it...we definitely want to get the Option 11C and HCM talking....(of course they have two HCMs not talking in PRI, Cornet or QSIG so they can pass CLID also!..they are using straight T1s right now)
Thanks!

dartlvr · May 11, 2007

I have it working on 9006.5 You can give me a e-mail and I will send you my number.

DoctorTouchtone · May 16, 2007

Houstontelecom at earthlink dot net

Thanks!

Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Siemens HCM300/9006i to Nortel PRI 1

DoctorTouchtone

IS-IT--Management

hotwalker57

Technical User

dartlvr

Programmer

DoctorTouchtone

IS-IT--Management

dartlvr

Programmer

DoctorTouchtone

IS-IT--Management

Similar threads

Part and Inventory Search

Sponsor