Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DST-Daylight Savings Time 1

Status
Not open for further replies.

jrmeridian

Technical User
Aug 31, 2006
53
US

Hello good folks,

Have a 61c with CallPilot. Anything special I need to do to make sure the time transition goes smoothly..thanks
 
For 2007 you will need to change your start and end dates as follows:

To move the clock forward on the 2nd Sunday of March at 2 am
FWTM 3 2 1 2

To move the clock backward on the 1st Sunday of November at 2 am or change the last digit to 3 to change it at 3am
BWTM 11 1 1 2

JohnThePhoneGuy

"If I can't fix it, it's not broke!
 
John,

Thank you very much my friend. I really appreciate your prompt response. Does the CallPilot pull the clock from the 61C?
 
Ok folks...pulled out the good Ole NTP's and if you want to check if your are set for DST.

LD 2

.TDST

The above command will display what the system settings are for DST. Also, (I will answer my own question from above), my voicemail system which happens to be CallPilot pulls the time from my PBX (61C)..I am sure many of you knew that (I was not sure).

Thanks,
JR
 
THIS IS FROM A ETAS TECH FROM NORTEL

A DST Extension PEP will be available for application to CallPilot 3.0 SU02 and CallPilot 4.0 SU03 servers in February 2007. This PEP will not be available for CallPilot 2.5 and earlier systems. In conjunction with the server PEP, an updated CallPilot Manager will be introduced. CallPilot 2.5 and earlier systems should upgrade to 4.0 and apply the DST extension PEP and the CallPilot Manager update.

In addition, to the CallPilot PEP, a Microsoft Windows 2003 hot fix will be required for the CallPilot PEP to function. The hot fix and instructions for its use are available at:


HOPE IT HELPS


OLD ROLMEN WORKING ON NORTELS
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top