MD110-AXE10

You can probably copy your settings for the other public switches, they all work in the same sort way...

It will also depend on how the public exchange has been setup.

For reference anyway here are my settings, this is connected to an AXE10 also )

<rocap:rou=20;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
20 012000000000001 5 2100030000 0 30 128 00151502 111100000020 001100

END

<rodap:rou=20;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
20 TL50 H'0000000C H'00000000 H'00000000 NO

END


<roddp:dest=9;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
9 20 0005000000000250000 0 2 0

This type is CCS (CAS), I'm working on ISDN PRI?

Hi,

for example, MD-AXE ISDN-E PRI route parameters (EDSS1):

<rocap:rou=all;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
10 711000000000 5 3100030001 0 0-30 128 01151515 011110000030 111111

<rodap:rou=all;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
10 SL60 H'00000310 H'15400000 H'06410000 NO

<roddp:dest=all;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
9 10 12050000000002500 0 2 0

END