I am trying to connect a buffer box to the BCM, I currently have a serial cable connected to the 9 pin connector on the front of the BCM, can I get CDR records through this connection? I know I can do a FTP push or pull through ethernet but because of a file conflict with my CDR vendor name I can't do that.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CDR BCM 400
- Thread starter plshlp123
- Start date
To my knowledge, there is no way of getting CDR data using a serial cable connected directly to the BCM.
You will need to connect a buffer that has LAN connectivity and use the CDR Push mechanism.
I have used Omnitronix in the past.
It seems to work well. There are others like WTI's Pollcat.
RSI also offers a software buffer called Winlink IP & Serial Data Storage at
Stockman16.
You will need to connect a buffer that has LAN connectivity and use the CDR Push mechanism.
I have used Omnitronix in the past.
It seems to work well. There are others like WTI's Pollcat.
RSI also offers a software buffer called Winlink IP & Serial Data Storage at
Stockman16.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
