Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to program fully auto control for AA

Voicemail Programming

How to program fully auto control for AA

by  atdjr123  Posted    (Edited  )
This configuration allows for the Vmail to be fully auto 24/7. The weekend Time Group may or may not be needed depending on weekend office hours. I program one so that Day IVR does not play on weekends.
Time Group = Day
8:00 am -17:00 pm Monday thru Friday
Time Group = Night
17:01 pm û 7:59 am Monday thru Thursday
Time Group = Weekend
17:01pm û 7:59 am Friday thru Monday

Time Conditions = Day
Time Group= Day - Association with=No association - Destination if time matches = IVR Day - Destination if time does not match = IVR Night
Time Conditions = Night
Time Group= Night- Association with=No Association - Destination if time matches= IVR Night - Destination if time does not match = Day
Time Conditions = Weekend
Time Group= Weekend - Association with= No Association - Destination if time matches = IVR Weekend - Destination if time does not match = Day
Your incoming route's destination should be Time Conditions ( IVR DAY ) this will insure that the call flow will always be predicated on IVR DAY's config...

Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top